The iCarsoft CR Plus Tool allow you to reset Oil and Service Lights in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
Brake Pad Reset Function
Reset the Brake Pad thickness light after changing the pads. This tool offers that capability on supported models.
SAS Reset Function
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle's require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models.
Compatible Vehicles
Will Cover Most Makes 2001-2014, Periodic Coverage for 1996-2000 Models, Call Matt with Questions 570-262-4806
Acura
Audi
BMW
Buick
Cadillac
Chevrolet
Chrysler
Citroen
Dacia
Daewoo
Fiat
Ford
GMC
Holden
Honda
Hummer
Hyundai
Infiniti
Isuzu
Jaguar
Kia
Lancia
Land Rover
Lexus
Mazda
Mercedes-Benz
MINI
Mitsubishi
Nissan
Opel
Peugeot
Pontiac
Porsche
Renault
Romeo
Saab
Saturn
Scion
Seat
Skoda
Smart
Sprinter
Subaru
Suzuki
Toyota
Vauxhall
Volkswagen
Volvo
OBDII
Functions Include: (all makes and models OBDII compliant)
1. Read
Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness
indicates whether or not the various emissions-related systems on the
vehicle are operating properly and are ready for Inspection and
Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an
emission-related fault occurs, certain vehicle conditions are
recorded by the on-board computer. This information is referred to as
freeze frame data. Freeze Data is a snapshot of the operating
conditions at the time of an emission-related fault.
6. O2 Sensor
Test -- This option allows retrieval and viewing of O2 sensor test
results for most recently performed tests from the vehicle’s
on-board computer.
7. On-Board Monitoring -- This function can be
utilized to read the results of on-board diagnostic monitoring tests
for specific components/systems.
8. Evap System Test -- The EVAP
test function lets you initiate a leak test for the vehicle’s EVAP
system. Before using the system test function, refer to the vehicle’s
service repair manual to determine the procedures necessary to stop
the test.
9. Vehicle Information -- The option displays the
vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
10.Retrieve
generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1)
codes and pending codes
11.Turn off Check Engine Light (MIL),
clear codes and reset monitors
12. Read live PCM datastream
13.
Support CAN (Controller Area Network) and all other
14.Multilingual
menu and DTC definitions- English, Spanish, and German, etc
15.Read
pending DTCs
16.Read permanent DTCs
17. DTCs search
18.
Supports all the OBDII/EOBD test modes include: CAN, ISO9141,
KWP2000, J1850 VPW and J1850 PWM.
19. Works on all 2001 and later
OBDII compliant PETROL European market vehicles
20. Works on all 2004 and
later OBDII compliant DIESEL European market vehicles
21. Works on most
1996 and later OBDII compliant US and Asian market vehicles
22. View &
Graph Live Data in Color Graphing and blazing fast refresh rate for
better graphing and live data readings.
23. Comprehensive Help,
Including OBD Parameter, Mode Explanations & More
What's
included:
Shipping
and Payment
Orders placed before 12pm PST will ship same day. Otherwise, they ship within 24 hours. Orders are shipped free of charge via USPS Priority Mail with tracking. Shipping can be upgraded to USPS Express. Payment only accepted through PayPal.
Returns
In the rare event an item is defective or damaged, returns will be accepted within 14 days of receipt or a replacement part will be shipped to you free of charge. Items may be subject to a 10% restocking fee.
Contact Us
For questions or comments, please contact us through the ebay system by clicking "Ask a Question" found below. Be sure to contact us if you are unsure whether this scanner will work with your vehicle. You may also call or text Matt with questions 9am-6pm PST 570-2six2-4806