EURO CYLINDER THUMB TURN Door Lock Barrel 6 Pin Lock NICKEL 70mm T35/35 3 Keys
- £6.99
Product Summary
MATERIAL: Steel
TYPE: Euro Lock Cylinder Barrel
STYLE: Key lockable thumb turn
ADDITIONAL FEATURES: 3 keys and single fixing screw included
Description
- Anti-pick and anti-drill pins for security
- High quality and secure 6 pin cylinder action
- Oval shaped thumb turn
- Nickel finish
- Supplied with 3 keys and a fixing screw
- 10 year manufacturer guarantee
- Individually boxed
Please note: When selecting your required cylinder size, the barrel end with the thumb turn is indicated by the dimension with a T adjacent (for example: T50/20 - the thumb turn end is the longer end with 50mm between central screw hole and thumb turn end)
Dimensions
Cylinder Size Configuration: 35/35T
Length: 70mm
Technical Information
For example: 50/50 lock is A = 50mm / B = 50mm
How do I measure and order a door cylinder?
How do I measure and order a thumb turn door cylinder?
The size of cylinder you need is determined by the thickness of the door and handle combination, for this reason there are many sizes available and you will need to be careful that you measure the cylinder accurately (one size will not fit all).
It is possible to measure a door cylinder in the door, but to be sure it's best to remove it first.
Measurement A: measure from the keyhole end to the middle of the central screw hole (e.g. 45 mm).
Measurement B: measure from the middle of the central screw hole to the thumb turn end (e.g. 35 mm).
Please remember: The location of the T on the size display indicates on which end the thumb turn is located (e.g 50/45T or T35/50)
Total length = Measurement A + Measurement B (including thumb turn)
How do I fit a new door cylinder?
1. Open the door and unscrew the one fixing screw which is located on the lock faceplate (the strip of metal the full length of your door), in line with the bottom of the door cylinder.
2. Put the key into one side whilst holding the other side firm.
3. Turn the key and the cylinder should slide out, if it does not turn the key in the opposite direction and the cylinder should slide out.
4. Take your new cylinder lock and insert the new key and turn it until the cam is inline with the body of the cylinder. Insert the new cylinder into position and replace the fixing screw.
5. If the door cylinder is offset (i.e. 40/60, 30/50 etc) ensure the offset is protruding from the correct side. Check the operation of the lock before you close the door.
How far should a door cylinder protrude out of the door handle?
Your new door cylinder should protrude between 2mm and 5mm from the handle back plates, but due to the overall lengths of cylinders available this is not always possible. It is most sensible to go for exactly the same size as you are replacing (unless your old cylinder was protruding excessively).
Delivery Policy
Our full delivery policy can be found here
All of our prices are inclusive of VAT
Northern Ireland (All BT postcodes)
Scottish Grampians (All AB postcodes)
Scilly Isles (All TR21-TR25 postcodes)
All areas above
Please note that surcharge pricing may vary depending on your order and your region. Surcharges are capped at £50.00 (excluding pallets). Please contact us for detailed pricing for your order if you wish to receive delivery to any of the above areas.
Please be advised that orders for 2 or more doors may be delivered using a palletised service. This service will only deliver your order to the road/kerbside as close to your property as possible using a tail lift, and the courier will not be able to assist with the unloading of the doors from the pallet itself. The pallet will not be taken away by the courier. The courier will be asked to contact you ahead of delivery, therefore a valid telephone number will be required. All palletised deliveries require a signature to confirm that the goods have been delivered without damage. Should this delivery arrangement not be suitable for you, or in the event of there being access restrictions to your delivery address, please contact us prior to placing your order. Please read our delivery policy for further information.
On the rare occasion an item offers a Collection Only service and cannot be delivered using traditional methods, this will be stated in the item description.
Please contact us for full pricing and advice.
Returns Policy
Please visit our returns page for the full policy
We would love all our customers to be happy with their purchases. However, should you wish to return your order for any reason, please read the following:
- Returns are accepted with the exception of Special Order items, if they are sent back to us in the original packaging within 30 days of receipt
- All goods MUST be inspected for any damage in accordance with our Delivery Policy, and we kindly request that any claims for damage be reported via email to us within 48 hours of receipt but within a maximum of 30 days from receipt. Where there is evidence of damage to the outer transit packaging you must mark the delivery as “Damaged“ when signing for it
- Should you choose to return your order for reasons other than damage/defect, please include a completed returns form within your parcel
- No statutory cancellation rights apply to products that have been specifically made to your requirements, design or measurements
- Refunds will be processed within 30 days of receipt of any returned items
Doorweb, Unit 321, Faraday Mill Business Park, Faraday Road, Plymouth, PL4 0ST
Our Returns Form can be downloaded here