M.NT68676 HDMI DVI VGA Audio LCD Controller Board Plus Power Adapter DIY Monitor
- This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. It supports most of the LCD panel from 12.1" to 55" with a LVDS interface and a resolution lower than 2048X1152, plug&play kit, no need soldering.
|
- Notice: Please remember to leave us your LCD Model Number before placing the order, it is very import for us to prepare the right kit for you.
|
- How to find a right lcd model number Please check the following picture. They are LP171WU5(TL)(B1),LM201U04 (A3)(K6), LM170E01(TL)(BB) and N133BGE-LB1. Their sizes are 17.1″,20.1″, 17″ and 13.3″.
|
- For LED display, no inverter is needed.
|
- Since different inverter board depends on your LCD panel model, and we may update the controller board a little bit, the kits you would receive may not exactly the same as pictured, please note!
|
M.NT68676.2A LCD / LED driver board | CHIPSET | InterfaceNT68676(UFG) | Asia-Pacific | OSD LANGUAGE | Simplified Chinese, Traditional Chinese, English, French, German, Italian, Spanish, Portuguese, Japanese, Korean (optional) | PANEL | Panel Type | LED/LCD | Interface | Single/Dual LVDS (8bit) | Max Resolution | 2048×1152 | VIDEO INPUT | PC-RGB | Format | Up to 2048×1152 60Hz | HDMI | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p | AUDIO INPUT | PC Audio | Earphone Input | 0.2 ~ 2.0 VRMS | AUDIO OUTPUT | Frequency Response | 100Hz~15KHz ±3dB (1KHz, 0dB reference signal) | Max Output power | 2× 1W(8Ω) THD+N<10% 1KHz (Power Supply: 12V, Audio Input: 0.5VRMS) | POWER | Requirement | 12V DC/12V(built)/12V,5V(built in)/12V,5V,5VSB(built in) | To Panel | 3.3V/5V/12V | Management | Standby Power Consumption < 0.5W(Board Only) | KEY FUNCTION | POWER,MENU,VOL+,VOL-,ADJUST/EXIT |
|
LCD Backlight Control CCFL 2 lamps Inverter | Features | High performance, low consumption | Open lamp protection | Wide Dimming Range | Lamp Current Balance Control | Input current overload protected ( fuse protect ) | Application | The DC to AC back-light inverter is special designed on any type LCD display in implement (i.e. LCD monitor, notebook、laptop computers etc.) | Suitable load | 17〞or smaller 2 Lamps TFT LCD Module |
|
Power Supply Adapter | Input | 100-240V AC 50/60Hz | Output | DC12V----5.0A |
| Applicable Type;- M.NT68676.2A LCD / LED driver board
- SIZE: (L)139 x (W)58 x (H)17 mm
- LCD Backlight Control CCFL 2 lamps Inverter
- SIZE: (L)120 x (W)29.5 x (H)14 mm
- Power Supply Adapter
- SIZE: (L)120 x (W)56 x (H)37 mm
|
- Package includes
- LCD Controller Board x1
- CCFL Inverter Board x1
- Power Supply Adapter x1
- 5 keys Keypad x1
- LVDS Cable x1
|
|
|