Universal sight pusher for removing or installing front and rear sights.

Works on most handguns with dovetail sights and a flat sided slide, Glocks,1911's, Kahr's, S&W Bodyguard etc...

Please check my other listings if you need tools with different clamping blocks for more applications.

Our tool is made of 25% larger material than others on Ebay!


Frame is steel with a 1/4" wall thickness, bare finish with anti-rust lubricant on surface

Save $ and paint it yourself if you wish.

We use a 1" wide frame and blocks, 3/8" thumb screw and 1/2" pusher bolt, unlike our competitors.
They (black tools listed) use 3/4" frames and blocks, 1/4" thumb screw and 3/8" pusher bolt.

Although newly listing on Ebay we have made sight tools for several years!

If you ever experience an issue with our products please let us know.

We stand behind our products!



Includes:

Sight tool

Straight sided clamping blocks for  all models of GLOCKS,Kahrs, 1911's etc..






 
Directions



Use cleaning patches or cardboard to insulate the slide ( use a material that won`t let the slide twist in the tool.)

Install the slide and shim as needed, line up to push at the base of the sight.

Tighten thumb screw to secure the slide. Do so by hand.

You might want to put a strip of tape between the pusher and the sight so the sight does not get marred. 

Slowly turn the bolt head (not the nut) while checking for alignment.


Note: On very tight sights soak the slide/sight in gun oil or freeze the slide/sight over night.

Some stock sights are fitted so tightly that you should consider taking it to a gunsmith or shipping it back to the manufacturer for removal.

Proudly Made in the USA
                                         

Posted with eBay Mobile