GM Holographic

• Great for fashion, party and leisure wear.
• A light adhesive backing enables fine cutting and aids registration.
• Easy cut and weed.
• Creates a brilliant 3D effect when viewed from different angles.

• Superb wash durability.
• Can be dry cleaned, tumble dried on a low setting and ironed inside out.
• Suitable for cotton, polyester, mixtures of polyester/cotton and polyester/acrylic or similar textiles.

Heat Press

Preheat the area of application that you’re placing the vinyl on for 10 seconds to remove any moisture. Place the vinyl design facing up as you’d expect to view the finished design. Once positioned, if you wish, you can use parchment or baking type paper on top as a cover sheet. Do not use Teflon, the vinyl will not transfer properly.

• Pressure: Medium
• Time: 15 Seconds
• Temperature: 150°C

Domestic Iron

If using a domestic iron DO NOT use steam. Ensure the material is on a hard flat surface not an ironing board. Gently iron the area of application to remove any moisture or creases. Using a cotton setting very firmly press one area of the design for 15 Seconds before moving to the next unpressed part. If when peeling the clear carrier sheet a part of the design hasn’t stuck, firmly repress that area for only 2-3 seconds.

Remove the cover sheet (if used), peel away the clear carrier sheet when the material is warm.

Reminder! Leave for 24 hours before washing or using. Machine washable 60°C, low tumble dry. Dry clean.