Wide range 2X10 systems with X-Glide front shifting technology, great for MTB’s
22.1mm gap between the centres of the 2 mounting holes. These 2x holes are also offset by approx. 5mm, with the front one being set further out (i.e. closer to the derailleur cage). The front mounting hole is almost flush with the inner cage of the derailleur when fully retracted (i.e. as it comes out of the box)
There is no up or down movement on these front derailleurs so you must choose the model that matches the outer chainring size of your chainset
Exact Actuation; When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.
X-Glide is the common denominator that gives 2X10 unmatched shifting performance. Four identical upshift locations, ready to be picked up by any outer link. Result? Perfect timing, almost instantaneous shifts, up or down, even under load.
10 speed for 2 X 10 system
Weight: 130g
Compatibility: 10 speed only
Mounting options: Low Direct Mount (S3)
Pull: Top
Technology: X-Glide shifting technology
00.7615.132.060 SRAM part number
This product is lightly marked, possibly from being fitted to a demonstration bike.