New 46" total Driver length SAT2041 beta-titanium super high rebound face Roketto Tadakatsu 460cc Model 9.5* or 10.5* 2.4mm constant cup face thickness Nonconforming Golf driver, gorges gold and black crown better material than last model means better rebound effect. Nonconforming drivers with SAT-2041 Japan material are selling for 500.00 Dollars and up. Not many golf manufactures will use this face material due to its cost.

COR values are at around .880 + or - .01 Will be shafted with a Fujikura Shaft of your choice from the drop down menu shafts will be spine aligned total Driver length will be 46" unless you request another length. these are original after market Fujikura Motore F1 55 shafts not a cheap OEM made for a golf company as the OEM versions are much less quality. Roketto Golf will never use a cheap or low quality shaft in are Drivers, as we believe to get the most out of your Driver you must have a good shaft installed. Comes with Head cover.
All Roketto Golf Drivers come with a one year warranty against manufacture defects.
Will have Golf Pride Tour Wrap 2G Standard Grip installed.                                                                  
                                                
             Head Specs
Lie: 56 Degree For 9.5 loft  and 56 Degree for 10.5 loft
Face angle: -0.5 Deg Closed,
weight 199 grams + or - 3 grams, Hossel size is .335


SAT2041 TI Face material is used on just a few golf drivers manufactures some of these drivers are listed below.

1.  Romaro Ray 460HX Gold Driver
2.  George Spirits Reoness

Our heads with the SAT-2041 Face material are inner milled at a face thickness of 2.4MM around the entire face creating a higher rebound effect at ball impact yet a softer feeling than other Titanium's. The SAT-2041 TI Face material is a step up from the 15-3-3-3-TI material we usually use.

USGA Legal golf drivers has a sweet spot face thickness of 3.3MM to 3.2MM and side areas of the face at around 2.8MM to 2.6MM as you can see Roketto Tadakatsu has a sweet spot of 2.4 mm and this is around the entire face which is called a constant face thickness the bottom line the thinner the sweet spot the more spring effect on contact of the ball resulting in more distance. The USGA would not have these guide lines on the COR values and face thickness if it weren't true. Please take the time and look at some of are other Drivers.

                            

  Fujikura max 56 Seniors flex shaft specs

weight    torque   launch   bend

58 g        4.5         high     mid/low


Fujikura motore f155 Reg and Stiff shaft specs

weight    torque    launch    bend

57g        4.0           mid        mid


Fujikura fuel 50 Seniors shaft specs

weight    torque    launch    bend    spin

56g         3.9       low/mid    mid       mid