Intel StrongARM SA-1110 Microprocessor Development Board

Description:

PSU and Ethernet adaptor missing. 6V 2.5A 0.7mm? input PSU needed

Without a PSU we are unable to test this. The unit was purchased for a project but another SA1110 board came the original owners way before they needed to use it so it is unused and untested. It seems to be complete apart from the PSU and CF - Ethernet adaptor which are missing. The optional companion SA-1111 which adds extra IO is not included.

Introduction:
------------
This SA-1110 Development Board is shipped with many hardcopy documents, including Readme files and Hardware Release Notes (this document). The Readme files and Hardware Release Notes contain last minute changes which are not documented anywhere else.

Warning: Before you begin for all SA-1110 Development Boards

The following components are very fragile on the SA-1110 Development Board. If these components are damaged, the board or unit will need to be replaced.
  • 140 pin connectors--very fragile, see documentation.
  • Display ribbon for J9--the ears are easily damaged.
  • Flexprint cable for display--Do not crease or bend at a
  • sharp angle.

Intel(R) StrongARM* SA-1110 Development Board Kit Contents:
------------------------------------------------------------
If any items are missing or damaged, contact your Intel sales
representative.

A fully populated SA-1110 Development Board is shipped with the following items:

  • Sharp 3.9 inch LCD touch screen
  • Two Electret microphones (attached to board)
  • Mini speaker
  • Lithium Ion battery pack with harness
  • Stereo headset (3.5mm)
  • Telephone headset (2.5mm)
  • Socket Communications Compact Flash Low Power Ethernet CF+ card (LP-E CF+ card)

MISSING
  • RJ12 Coupler
  • Static control wrist strap
  • Stylus
  • Jumpers (shunts)

Power supply:
MISSING -6V 2.5A 110-240V 50-60Hz AC to DC adapter for U.S.A or EU, APAC
The power input socket is smaller than the common DC 2.1mm (we think it is 0.7x2.35mm).

Cables:
  • Base station cable with 9-pin Dsub serial port, 25-pin Dsub JTAG, RJ11 phone jack
  • TV video out cable
  • A 10BASE-T unshielded twisted pair (UTP) "cross-over" Ethernet cable to go between the host and SA-1110 Development Board

Development tools
  • Evaluation version of the ARM* Development Suite (ADS) version 1.01 ** marked ** 1.0.1
  • CD -Intel(R) StrongARM* SA-1110/1111 Microprocessor Development platform CD ROM Kit Rev. 1.3
  • CD red hat linux embedded linux crossdevelopment kit rev. 1.2 StrongARM targets

Documentation
  • Intel(R) StrongARM* SA-1110 Microprocessor Development Board User's Guide 18 pages
  • Intel(R) StrongARM* SA-1110 Microprocessor Development Board User's Guide 72 loose sheets hardware build phase5

  • Intel(R) StrongARM* SA-1110 Microprocessor Development Board Part's List 10 pages

  • Intel(R) StrongARM* SA-1110 Microprocessor Development Board Schematics 19 A3 pages

  • Intel(R) StrongARM* SA-1110 Development Board Hardware Release Notes (this document)

  • Intel(R) StrongARM* SA-1110 Microprocessor Developer's Manual Approx. 360 pages

  • Intel(R) StrongARM* SA-1110 Microprocessor Brief Datasheet 10 pages

  • Intel(R) StrongARM* SA-1110 Microprocessor Specification Update 42 pages

  • Intel(R) StrongARM* SA-1111 Microprocessor CompanionChip Brief Datasheet *Not present

  • Intel(R) StrongARM* SA-1110 Microprocessor CompanionChip Specification Update *not present

  • Intel(R) StrongARM* SA-1110 Development Board Specification Update 32 pages

-Intel(R) StrongARM* SA-1110/SA-1111 Development Kit
Quick Start User's Guide -- Not available at the printing of this document; check Intel's website for developers for new documentation.

-Marketing collateral
Note: The schematics, parts list, software (including the CPLD source code) and copies of the documentation are available from the developer's area on the Intel website.


Also shrink wrapped Nucleus evaluation kit

Estimate 100 page ring bound book with CD?




International orders

International orders (including to the European Union) may also be subject to import duties, and other local taxes and charges, which the buyer will be responsible for. We will always ensure items have a correctly filled Customs document.

Shipping

We follow ebay guidelines and only send to a verified PayPal address unless by prior arrangement.
UK delivery: Light Items are normally sent by Royal Mail untracked post, heavier items are sent by 3-5day courier.
Non UK delivery is normally sent by untracked Airmail (2-3 weeks Europe, 3-6 weeks for most of the rest of the world).
Next day delivery in the UK and express delivery to the rest of the world can be arranged. Please contact if you want express shipping.

Payment

We are able to accept payment by cleared cheque and Postal Order (£3 handling fee). Cheques payable to "Fourth Dimension" please.
Bank transfers to Sort Code: 20-20-62 Account no.: 70677213 Acc. Name: Fourth Dimension
International bank account no.: IBAN GB26BARC 202062 7067721
SWIFT BIC: BARCGB22 n.b. If your Bank requires an 11 character SWIFT BIC, use BARCGB22XXX instead.
For bank transfers from outside the UK, please add £6 to cover bank fees on orders of less than £200.

About Us

four-d-pi-shop is the ebay arm of CJE Micro‘s & 4D, who have the world's widest range of Raspberry Pi/RISC OS & Acorn accessories including many from third parties, most of which are famously normally 'In Stock'. Established in 1981, we have always specialised in hobbyist computing and have gained a reputation for a broad knowledge with high quality pre- and post-sales service.
CJE & 4D have, over the years, developed many of our own products for Acorn/RISC OS & Raspberry Pi computers. From the first ever 3rd party accessory for BBC Micro Model B (cassette leads) to the first ever 3rd party hardware for the Raspberry Pi Model B (Real Time Clock Module).
We are continuing to develop new products and expect to make a number of significant launches during the next year. Fourth Dimension (4D) is a sister business to CJE Micro's, having been a sibling since 1998.

Contact Us

The Shop

Our showroom and sales area is normally open from: Monday to Friday 9am - 5.30pm
To find our shop you can view our address in the "Business Seller Information" below.