LUXURY THERMOSTATIC SHOWER PANEL WITH BLACK TEMPERED GLASS:

Specification, features and whats Included:

• Shower Panel Tower or 'Column' with Black Tempered Glass Front and a 'brushed' Aluminium body. The ends are ABS.
• Solidly made metal/chrome control knobs. The upper knob is a Diverter Control for water flow and the lower one is a Thermostatic Temperature Control for comfort and safety. There is an override stop switch set at 38 Deg's C.
  
• 8 individually adjustable Hydro-massage Water Spray Nozzles Jets. Each 'Jet' pivots separately and the spray pattern can be adjusted. Each Jet has some 14 spray holes in total (8 in the centre and 6 surrounding them)!
  
• Large and solidly made (brass/chrome) 8" (20 cms) Overhead Shower Head with easy clean Rubber nozzles & Swivel joint on top.   
• Adjustable Shower Arm (metal/chrome) - with 2 'wing-nut' adjustment mechanisms.
• Handheld Shower Head, with adjustable spray patters and its own
• wall-mounted holder
.
• A Stainless Steel flexi hose which is some 1.5m long.
• Bath Filler Spout (or 'Foot washer' as it is sometimes called!).
  
• Brackets/Fixings/Flexible Connection Hoses. Corner Mounts are also available separately.

Water pressure/Dimensions/measurements:

• The recommended operating water pressure is between 1 to 5 bar.  
• Overall width: 26cms (The Black Glass is some 24.5cms).
  
• Overall Height: 1.3 metres tall.
• Overall Depth of body: 7cms.
• Main Shower head is some 20cms diameter.
• Length of Arm from Glass front: 24 (to centre of Head connection).
• Bath Spout: 7.5cms.
• Jets: 6cms wide and 5.5cms deep.

Installation:

It is simple to install. It comes with 2 brackets which are screwed into a solid/secure wall, and there are 2 metal 'braces' across the back of the body which hang on these brackets.  Then you connect up the 2 Flexible hoses situated in the lower half of the body to your Hot and Cold water feeds.  These flexi hoses are approx 50 cms long and have 1/2" BSP compression nuts on their ends (inside diameter 3/4").

The Shower will work with Combination Boiler systems, Gravity fed systems (subject to adequate water pressures), Pumped hot water systems, un-vented hot water systems or Standard hot water cylinder type systems.