HC-05 Integrated Bluetooth Module Wireless Serial Port Module 6 pin
HC-05 Integrated Bluetooth Module Wireless Serial Port Module 6 pin
- Descriptions:
Features:
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
How to connect to the computer Bluetooth module (from mode):
(The following order with the computer paired with Bluetooth as an example)- First to pass through the Bluetooth module power, this time led blinking, open "My bluetooth location", click "Search for devices in range"
- The system will search for Bluetooth devices, the default device name "linvor" (as modified name was modified name, such as "jiayuanelectron"), double-click or right click and select "Add a Bluetooth device"
- Enter a passcode (the default is "1234"),
- Click "Next", if the password is correct, the computer and the pass-through module connection is established, if not previously had a Bluetooth serial devices installed, the system will automatically install the driver and generate a virtual serial port
- Click Configuration, select the appropriate COM port,
- I am here only choose com5, the serial port is connected to the computer after the end of the operation, such as I have here is com5, open the port when the Bluetooth module from the LED will flash into a double flash, then just take the Bluetooth module as is the computer's serial port to fixed baud rate used in the same, except that it is wireless.
- Package Contains:
Features:
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
How to connect to the computer Bluetooth module (from mode):
(The following order with the computer paired with Bluetooth as an example)
- First to pass through the Bluetooth module power, this time led blinking, open "My bluetooth location", click "Search for devices in range"
- The system will search for Bluetooth devices, the default device name "linvor" (as modified name was modified name, such as "jiayuanelectron"), double-click or right click and select "Add a Bluetooth device"
- Enter a passcode (the default is "1234"),
- Click "Next", if the password is correct, the computer and the pass-through module connection is established, if not previously had a Bluetooth serial devices installed, the system will automatically install the driver and generate a virtual serial port
- Click Configuration, select the appropriate COM port,
- I am here only choose com5, the serial port is connected to the computer after the end of the operation, such as I have here is com5, open the port when the Bluetooth module from the LED will flash into a double flash, then just take the Bluetooth module as is the computer's serial port to fixed baud rate used in the same, except that it is wireless.
- Package Contains:
