90 DEGREE 1:1 Ratio CONSTANT SPEEDO DRIVE ADAPTOR 

part number GAC4

 BUY DIRECT FROM GENERAL AUTO CABLES

3 month replacement warranty from when buyer receive the item

 This 90° adapter fits most Japanese Gearboxes with the speedometer cable or electronic sender unit screws onto it. is primarily used in tight clearance situations to avoid speedometer cable installations that require severe bends in the cable, which in turn create a "Bouncing" Speedometer Needle. This unit has a 1-to-1 direct-drive ratio.

 Input End: M22 x 1.5 Internal Thread with 4.8mm diameter key End. 

Output End: 7/8-18 External Thread with 0.105" Internal Square Hole to suit most cables with 7/8 Nut and 0.104" External Square. 

When it is connected to the Transmission It sticks out 40mm. 

We strongly recommend that you pull out the speedo drive from the gearbox first, screw it to the angle drive and turn the gear to make sure it all turns freely before you put it all back. Please ensure its screwed dead straight on speedo drive to avoid jamming. Best to remove the drive from transmission screw angle drive to it and turn by hand before re inserting drive back in the transmission or jack the rear of the car and rotate the tires slowly making sure the angle drive is turning freely