Brand：JJC
Model：JM II
Product Type：Radio Frequency Wireless Shutter
Material：ABS+PCB+Brass
Brief Introduction：
JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and SLR cameras that have a remote socket on the camera body. The system works at a 433MHZ frequency and has 16 available channels. What’s more, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters. The JM-II receiver simply attaches to a compatible camera's hot shoe, then just use the supplied cable to connect the receiver and the camera's remote socket. The receiver is powered by one piece of CR-2 lithium battery( Not Included ) while the transmitter is powered by one piece of 23A battery( Not Included ). JM-II transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket on the bottom, so you can even mount the receiver onto a tripod. Most important, our JM-II transmitter is able to fire multiple receivers at the same time. All these features make it good for eliminate camera shake in long exposure photography.
Product type：433MHz Radio Frequency Wireless Shutter
Working distance ：Up to 30M
Channel：16
Cord Length：Stretchable to 60cm
Receiver weight：Approx × 19g
Receiver Size：48 × 38 × 29mm
Transmitter weight：Approx × 18g
Transmitter Size：82 × 27 × 14.7mm
Compatible with remote switch model:OLYMPUS RM-UC1
Model：JM II
Product Type：Radio Frequency Wireless Shutter
Material：ABS+PCB+Brass
Brief Introduction：
JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and SLR cameras that have a remote socket on the camera body. The system works at a 433MHZ frequency and has 16 available channels. What’s more, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters. The JM-II receiver simply attaches to a compatible camera's hot shoe, then just use the supplied cable to connect the receiver and the camera's remote socket. The receiver is powered by one piece of CR-2 lithium battery( Not Included ) while the transmitter is powered by one piece of 23A battery( Not Included ). JM-II transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket on the bottom, so you can even mount the receiver onto a tripod. Most important, our JM-II transmitter is able to fire multiple receivers at the same time. All these features make it good for eliminate camera shake in long exposure photography.
Product type：433MHz Radio Frequency Wireless Shutter
Working distance ：Up to 30M
Channel：16
Cord Length：Stretchable to 60cm
Receiver weight：Approx × 19g
Receiver Size：48 × 38 × 29mm
Transmitter weight：Approx × 18g
Transmitter Size：82 × 27 × 14.7mm
Compatible with remote switch model:OLYMPUS RM-UC1
|
E30 |
E400 |
E410 |
E420 |
E450 |
|
E510 |
E520 |
E600 |
E620 |
E-P1 |
|
E-P2 |
E-P3 |
E-P5 |
E-PL2 |
E-PL3 |
|
E-PL6 |
E-PL7 |
E-PL8 |
OM-D E-M1 |
OM-D E-M5 |
|
OM-D E-M5 II |
OM-D E-M10 |
OM-D E-M10 Mark II |
SP-510 UZ |
SP-550 UZ |
|
SP-560 UZ |
SP-565 UZ |
SP-570 UZ |
SP-590 UZ |
STYLUS 1 |
|
STYLUS 1s |
STYLUS SH-1 |
Stylus SH-2 |
XZ-1 |
PEN F |
|
E-PL9 |
