https://www.tupianku.com/view/full/10023/newheader01.jpg


170° Car Rear View Camera Reverse Backup Parking Waterproof Night Vision CMOS CA

 

Description:
1.Anti fog glass.
2.CMOS imaging sensor.
3.Support NTSC video system.
4.Embedded mounting in rear bumper.
5.Snap-in design, it is easy to install.
6.High sensitivity and low power consumption.
7.High-definition and 170 degree wide viewing angle.
8.Water-proof, shock-proof and anti-jamming functions.
9.It helps to avoid incidents and accidents abrasion well.
10.Extra-low illumination of 0.5 Lux for clear night vision.
11.Its simple and modest design and small size won't draw any attention.
12.This camera can give you a full sight of the back of your car when you are driving.
13.To protect your car from collision with invisible obstacle, choose a high definition and
good quality camera as ours.
14.Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper,
truck or any vehicle that has no rear-view mirror or poor rear vision.
15.Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution
mounted inside will fit into most vehicle key holes, no other installation needed.

Specification:
Lens: 2.0cm
Color: Black
TV System: NTSC
S/N Ratio: >48dB
Net Weight: 128g
Water-proof: IP66
Power: DC 12V±10%
White Balance: Auto
Camera Size: 22*21mm
Sync. System: Internal
Video Cable Length: 6.0m
Video Output: 1.0Vpp, 75Ohm
Length Angle: 120~170 degree
Cable Length of Camera: 59cm
Scanning System: 2:1 Interlace
Power Supply Cable Length: 41cm
High grade of waterproofing: IP66
Horizontal Resolution: 420 TV lines
Effective Pixels: NTSC: 510(H) * 492(V)
Current Consumption: No More Than 300mA
Image Sensor: CMOS 1/4 MT9V125 or PC1030, color
Minimum Illumination: 0.2 Lux/ F1.8(0 Lux with LED)
Storage Temperature: -30℃ to + 60°C, 95% RH maximum
Operating Temperature: -20℃ to + 60°C, 95% RH maximum
Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds

Installation:
1.Mount the camera inside the keyhole of your vehicle.
2.Adjust the lens of the camera to its best position.
3.Connect power cord to connect to your vehivle DC 12V power system.
4.Connect the video output(yellow) of the camera to the display in your vehicle.

Package Included:
1 X Video Cable
1 X Power Cable
1 X User Manual
1 X Car Rear View Camera


Payment

We accept Paypal and Credit card as payment method ,because of convenience and safety.

Shipping

These items are held in stock and are available for same day dispatch.
In most cases, the delivery time varies from 4 to 18 working days in Canada,
when items are sent aboard or in peak period, the time will be prolonged according to certain situations, which may beyond our control, but we are always ready to help you track the delivery info.


Terms of sale


If you are not satisfied with the purchase or items, please contact us first so that we can better solve your problems. Items can be returned simply in 30 days in an unused condition, we will make an exchange or refund once we received the item. Customers need to bear the postage if the return is not for quality issues, other time we'll take full responsibility. Please keep tags entire and items clean with no flavor, or we won't accept the return.

About US


We are always making efforts to providing better products and service. if you feel satisfied with us, please leave us a 5-Star on the Detailed Seller Ratings.
In return, we will make a positive feedback as soon as we receive your payment.
We always try to provide the most cost efficient products for customers, the smoothest payment and after-services, your feedback will help us make progress in many aspects.



Description:
1.Anti fog glass.
2.CMOS imaging sensor.
3.Support NTSC video system.
4.Embedded mounting in rear bumper.
5.Snap-in design, it is easy to install.
6.High sensitivity and low power consumption.
7.High-definition and 170 degree wide viewing angle.
8.Water-proof, shock-proof and anti-jamming functions.
9.It helps to avoid incidents and accidents abrasion well.
10.Extra-low illumination of 0.5 Lux for clear night vision.
11.Its simple and modest design and small size won't draw any attention.
12.This camera can give you a full sight of the back of your car when you are driving.
13.To protect your car from collision with invisible obstacle, choose a high definition and
good quality camera as ours.
14.Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper,
truck or any vehicle that has no rear-view mirror or poor rear vision.
15.Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution
mounted inside will fit into most vehicle key holes, no other installation needed.

Specification:
Lens: 2.0cm
Color: Black
TV System: NTSC
S/N Ratio: >48dB
Net Weight: 128g
Water-proof: IP66
Power: DC 12V±10%
White Balance: Auto
Camera Size: 22*21mm
Sync. System: Internal
Video Cable Length: 6.0m
Video Output: 1.0Vpp, 75Ohm
Length Angle: 120~170 degree
Cable Length of Camera: 59cm
Scanning System: 2:1 Interlace
Power Supply Cable Length: 41cm
High grade of waterproofing: IP66
Horizontal Resolution: 420 TV lines
Effective Pixels: NTSC: 510(H) * 492(V)
Current Consumption: No More Than 300mA
Image Sensor: CMOS 1/4 MT9V125 or PC1030, color
Minimum Illumination: 0.2 Lux/ F1.8(0 Lux with LED)
Storage Temperature: -30℃ to + 60°C, 95% RH maximum
Operating Temperature: -20℃ to + 60°C, 95% RH maximum
Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds

Installation:
1.Mount the camera inside the keyhole of your vehicle.
2.Adjust the lens of the camera to its best position.
3.Connect power cord to connect to your vehivle DC 12V power system.
4.Connect the video output(yellow) of the camera to the display in your vehicle.

Package Included:
1 X Video Cable
1 X Power Cable
1 X User Manual
1 X Car Rear View Camera
PAYMENT
We accept Paypal and Credit card as payment method ,because of convenience and safety.

SHIPPING
These items are held in stock and are available for same day dispatch.
In most cases, the delivery time varies from 4 to 18 working days in Canada,
when items are sent aboard or in peak period, the time will be prolonged according to certain situations, which may beyond our control, but we are always ready to help you track the delivery info.

Terms of Sale
If you are not satisfied with the purchase or items, please contact us first so that we can better solve your problems. Items can be returned simply in 30 days in an unused condition, we will make an exchange or refund once we received the item. Customers need to bear the postage if the return is not for quality issues, other time we'll take full responsibility. Please keep tags entire and items clean with no flavor, or we won't accept the return.

ABOUT US
We are always making efforts to providing better products and service. if you feel satisfied with us, please leave us a 5-Star on the Detailed Seller Ratings.
In return, we will make a positive feedback as soon as we receive your payment.
We always try to provide the most cost efficient products for customers, the smoothest payment and after-services, your feedback will help us make progress in many aspects.

DataCaciques