4 x Viablue TS banana plug tube

High-end connectors with insulation sleeve.

One Wiha 1.5mm tool per order and not for every item

Product description:

 Viablue™ TS Banana Plugs Tube make contact with speaker jacks using a tube splice system. When the TS banana plug tube is inserted into the speaker sockets, a sinusoidally cut cylinder creates an even, constant pressure on the entire clamping surface, which creates optimal surface contact and ensures an extremely firm hold of the banana plug.

The Viablue ™ TS series was developed to offer an ideally fitting connector for all socket types. All TS plug connections protect against short circuits through a transparent insulation sleeve. The opening for receiving the cables of the TS connectors is 5 mm wide, so cables with up to 8 mm² can be installed.

Viablue™ TS connectors. Speaker cables can be mounted very easily and conveniently in Viablue ™ TS connectors. All you need is a stripping tool to strip the cables and a screwdriver (hexagon socket 1.5) to fasten the cables in the plug connections. The speaker cable should be approx. 8 mm of insulation must be stripped and inserted into the housing interior of the TS connector as far as it will go. The cable can be easily tightened using the two M4 screws and therefore has a very strong hold in the plug. Soldering is not necessary. In order to better protect the sensitive strands of a high-quality speaker cable from possible breakage due to the screw connection and permanently against oxidation, it is advisable to crimp the stripped strands with the Viablue ™ OFC copper wire end sleeves before installing the TS connectors.

Technical details:
  • Contact: 4mm tube splice
  • Contact length: 20.5 mm
  • Finishing: 24 carat gold plating
  • Total length: 46.0 mm
  • Cable holder: for cables up to Ø 6 mm
  • Marking: black / red
  • Screws: 1.5 mm hexagon socket
Viablue™ TS connectors. Speaker cables can be mounted very easily and conveniently in Viablue ™ TS connectors. All you need is a stripping tool to strip the cables and a screwdriver (hexagon socket 1.5) to fasten the cables in the plug connections. The speaker cable should be approx. 8 mm of insulation must be stripped and inserted into the housing interior of the TS connector as far as it will go. The cable can be easily tightened using the two M4 screws and therefore has a very strong hold in the plug. Soldering is not necessary. In order to better protect the sensitive strands of a high-quality speaker cable from possible breakage due to the screw connection and permanently against oxidation, it is advisable to crimp the stripped strands with the Viablue ™ OFC copper wire end sleeves