1.25m Eutech Cu high end power cord

Furutech FI-E11 Cu, FI-11 Cu, eupen 3x2.5mm² low pass power cord

Electric wire: eupen Cable type LP / GNLM 3G2.5 audio line (3x2.5mm²)

Ferrite technology from the eupen cable works

This technology is based on a high-quality ferrite-based powder. A special mixture has been developed, made up of a polymer material to which a considerable amount of ferrite powder (up to 90%) is added. The mixture is applied to copper conductors by means of extrusion and is called EMC / COM. 

The ferrite powder is electrically non-conductive; it has very interesting magnetic properties. Because ferrite is a ferromagnetic material, it is constantly being remagnetized in an alternating magnetic field. The magnetization follows a hysteresis loop and with each cycle energy is withdrawn from the electromagnetic field, which is released again as heat. This process increases steadily with the frequency. The ferrite layer on a conductor has the effect that higher frequencies are strongly attenuated because most of their energy is absorbed in the ferrite powder. This applies both to high-frequency interference that moves on the conductor and which must not disturb the environment, as well as to interference that occurs in the environment and which should not affect the signal on the cable.

Plug: Furutech FI-E11 Cu and FI-11 Cu

All connectors are treated with the α (Alpha) process developed by Furutech . The material is subjected to a freezing process, whereby the parameters time and temperature (up to -250 ° C) can be precisely dosed. Then all metal parts are demagnetized.

The molecular structure of the metals is ordered and compressed at the same time by the freezing process. The electrical conductivity is increased. Due to the permanent demagnetization, practically perfect conductivity can be established.

Fabric hose:

The cable is covered with a black fabric tube. There is a nicer look, cable protection and low microphone effects.

Wire end sleeves:

The wire ends are terminated with WBT 24 K gold-plated OFC sleeves. This makes the best contact quality possible.

phase is marked on the Schuko plug and on the device socket.

Can be ordered in Allen lengths.

Please call us or send us an e-mail for your desired designs.

You can find the contact details below in the "Legal information of the seller".

The ferrite powder is electrically non-conductive; it has very interesting magnetic properties. Because ferrite is a ferromagnetic material, it is constantly being remagnetized in an alternating magnetic field. The magnetization follows a hysteresis loop and with each cycle energy is withdrawn from the electromagnetic field, which is released again as heat. This process increases steadily with the frequency. The ferrite layer on a conductor has the effect that higher frequencies are strongly attenuated because most of their energy is absorbed in the ferrite powder. This applies both to high-frequency interference that moves on the conductor and which must not disturb the environment, as well as to interference that occurs in the environment and which should not affect the signal on the cab