VERY RARE OPPORTUNITY TO OWN ONE OF THE MOST WELL PUT TOGETHER MUSTANGS EVER BUILT IN THE TRANS AM RESTO MOD THEME!! This 1969 Original body Mustang was built by Agent 47, a well respected racing parts business and race team based out of Southern California. The car is named HARBINGER which means foreshadowing what is to come because of all the cutting edge 3D printed parts used in the build. As time goes on you will see more and more Customized cars using this technology due to its accuracy and light weight. Only one other Harbinger was built which is still owned by Corey Weber of Agent 47 and is known as the HARBINGER X2. He successfully pioneered his car in the American Iron race series and won multiple championships with it. The HARBINGER was a huge hit at SEMA in 2010 and has been featured in Popular Hot Rodding as well as Modified Mustangs & Fords. The chassis and suspension was designed in collaboration with Bill Osborne, of Silver State Open Road Challenge Big Red fame. The interior and exterior trim color is the most noticeable change made to the car since it was built. The car has very recently had every nut, bolt and loom gone through.

This thing is loud and fast personified. Not hard to drive but very raw like a car of this style should be. It is street legal in most states but may require windshield wipers, horn, etc in others. Mounted on the wheels are the original tires to show what little use(abuse) there is on the car. Be warned this thing attracts attention any and everywhere you go. Be ready for thumbs up and crowds in parking lots. The car recently won car of the week at South Orange County Cars & Coffee where it went up against the latest and greatest exotic cars.

I have an itemized list of approximately $200,000 worth of parts that went into this build. I spoke with the owner of AGENT 47 Corey Weber and he conveyed to me that the car took approximately a year and half to build and about 6,000 man hours. If you do the math and wanted a car like this built it would cost roughly 6000 hours x $100 hour = $600,000 plus $200,000 in parts for a GRAND TOTAL of $800,000 and 1.5 years. This is a very well built and sorted MACHINE.

Do your research, watch the videos, read the magazine articles online, look up Bill Osborne and Corey Weber. This car is full of history and it’s worth every penny. Please feel free to contact me with any questions.

****DEPOSIT IS NON REFUNDABLE****

http://www.a-47.com/

http://www.shop.agentfortyseven.com/

https://www.youtube.com/watch?v=fNtX6CVr9t8

http://www.mustangandfords.com/featured-vehicles/mdmp-1110-1969-mustang-sportsroof/

https://www.hotrod.com/articles/1109phr-1969-ford-mustang/

1969 original Mustang body
	Body blasting and lightening 
	Seam welding		
	Flared rear fenders 
        A47 lightweight urethane headlight buckets stock style	
	A47 lightweight urethane rear quarter end caps   
	A47 fiberglass front spoiler 	
	Front and rear steel bumpers 	
	Stock front grill 
	A47 Ram air scoops	
	Ducted Hood Package including
				Ducted hood
				Wizard tilt radiator
				Aluminum duct assembly
				Aerocatch hood pins
				Hood props
				Electric pusher fans	
	Brake cooling package 
	     A47 cooling scoops
	     Duct
	     Spindle brackets	
	69 rear taillight panel grafted
	A47 lightweight tail light housings
	Stock tail light gaskets
	A47 Tinted tail light lenses
	Scott Drake sequential LED tail lights
	Drip rail shaving
	New stock glass front windshield
	Flush mount scratch resistant rear glass with supports 	
	Firewall smoothing
	Stock decklid hinge spring delete
	Rear decklid prop
	A47 Tow hooks front and rear
	Tie down loops rear
POWERTRAIN
	Ford Performance Systems 402 Ford Windsor
        Dart aluminum block
        Aviaid dry sump system with custom oil pan
        15 quart dry sump oil reservoir in fender
        RPM 4340 forged crank
        Oliver 6 inch rods
        10.7:1 Race Tech forged pistons
        Avenger XTC canted valve heads with 2.20 intake and 1.675 exhaust valve
        Custom CNC work done by FPS
        Pacific Performance Products solid-roller camshaft
        T&D aluminium shaft mounted rockers
        830-cfm Holley carburetor on a modified Edelbrock 2938 intake
        Claimed 678 Hp and 557 Ft-lb at the crank
        Temec T-56 Magnum close ratio 6 Speed Transmission 
	Quicktime bell housing
	McCleod RST clutch and flywheel
	McCleod 1400-30 Hydraulic throwout bearing
	Moser third member and Wavetrac rear diff
	Aluminum drive shaft
SUSPENSION	
	A47 Front SLA suspension with SN-95 rack and pinion steering 
	A47 Rear 3 Link rear suspension including speedway housing and adjustable panhard bar
        Penske F1 single adjustable coilover shocks with A47 tune 
        Hyperco 400lb springs front 175lb rear
        Nascar style weight jackers
	A47 Front custom splined sway bar and end links 
BRAKES	
       AP Racing 4 piston caliper with 14" rotor front,
       AP Racing 4 piston caliper with 13" rotor rear
	WHEELS	
	Forgeline/Agent 47 18" Minilites in 9.5 or 11" width 
TIRES	
	Toyo RA1 305 front 335 rear
INTERIOR 
	Agent 47 Full cage with street door bars 
        Roll bar padding with leather wrap   
        A47 vintage racing seats package  
	Schroth Enduro Harness  
	Tilton Hanging Pedals
	 A47 Pedal Pads
	 Mounting brackets
	 Tilton brake and clutch reservoir and mount
	 Tilton master cylinders
	 Scott Drake dash with trimming, mounting tabs and extension plate 
	 A47 gauge panel with location for fire pul and master switch
	 Autometer custom gauges
	Agent 47 carbon FDM shifter 
	Sweet steering column package 
	   Steering wheel quick release
	   Mounting brackets
	   Momo Mod 80 steering Wheel
	   Steering column, shafts and U-joints
	   Frame support plate w/ rod end
	   Firewall bearing and plate
	Master switch with battery cable (with A47 gauge panel)
	Brake bias, Warning Light package
	Aluminum interior skins w/ rear panel
	Rear quarter glass deletes
	A47 Interior door panels 
	A47 center console switch panel w/ Starter button
        Fuel Safe Pro 22 fuel Cell Package
        Battery tray trunk mounted
	Removable carpet
	3D printed stainless steel serialized number plate 
	Harbinger floor mats
	Harbinger rear badge
	Harbinger fob for ISIS system
ELECTRICAL
	Infinitybox Isis Multiplex CAN bus electrical system 
        https://infinitybox.com/can-bus-system-products/aftermarket-products/
PLUMBING
	Remote dual oil filter 
	Setrab oil cooler 
	A47 custom radiator hoses
	A47 fuel pump bracket
	A47 headers polished
	Side exit exhaust package
		Stainless tip plate
		Custom exhaust system
FIRE SYSTEM
	Safecraft 2 nozzle system with remote cable release