Jarder Motion Sensor Solar LED Light | Wall Mounted Security Floodlight | Model LE-HBT-1806B
Product Features

• Energy-saving 900 lumen
• Solar-powered & wireless, so no need for any cabling or batteries
• Can be installed simply and easily just about anywhere
• Widely used in courtyards, paths, gardens, stairways or anywhere a security or emergency floodlight is required
• No need for a mains power supply
• Proximity sensor + light sensor
• 4 smart lighting modes
• Energy saving – if there is no one in the proximity zone, the light will dim / turn off
• 48 super-bright LEDs
• Lithium iron phosphate battery
• Waterproof to IP65

Product Specifications: Solar Panels: 5V 3.2W | Accumulator: Lithium iron phosphate battery 3.2V 4500mAh | Maximum Voltage: 3.65V | Minimum Voltage: 2.65V | Working Current: 30-1800mA | Maximum Power: 6.8W | LED Specifications: SMD 2835 29-30lm 4000k or 6000k | LED Quantities: 48pcs | Maximum Lumen Value: 900lm | Charging Time: 8 hours | Detection Angle: 120 degrees | Detection Distance: 5-8 metres | Dimensions: 180 x 55 x 195mm | Waterproof Grade: IP65

Light Modes
Mode 1: When a person moves into the proximity zone, the floodlight will light fully. With nobody in the proximity zone, the light will dim but stay on.
Mode 2: When a person moves into the proximity zone, the floodlight will light fully. With nobody in the proximity zone, the light will turn off.
Mode 3: The system will always light at night. No induction function.
Mode 4: Commonly used for emergency lighting e.g. power failure. The timing of emergency light mode is 30 minutes. The solar panels should be restarted or illuminated after the light switches off.
Mode 5: System off. During the daytime, the system charges using the sun’s energy.