6kg Rewmar MS Polymer Wood Floor Adhesive

(Coverage upto 6m2 using a 6mm V-Notched trowel/spreader)

Free Delivery applies to UK Mainland, for delivery to N.Ireland, Highlands & Islands please message for a quote

Contents is 1x 6kg bag of adhesive

Good for smaller jobs not requiring a whole 16kg tub

Longer working time as the foil bags can be folded closed to prolong the "going off time"

Rewmar MS Polymer Adhesive is a flexible flooring adhesive that is suitable for the installation of any wooden floor to almost any subfloor. The 6kg product has a new improved formula and is packaged in 1x 6kg foil pouch, in a cardboard box for easy disposal. This also gives the product a longer lifespan (12 months) and is easier to transport. Coverage is approximately 1m² per kg of adhesive.

Pack Size: 6kg (1 x 6kg foil bags)
Coverage: 6m² (1m² per kg of adhesive)
Application Method: 6mm V notch trowel
Open working time: 20 – 30 minutes

Rewmar MS Polymer is a one part, modified silane based flexible wood flooring adhesive. It is suitable for sticking down any species of wooden flooring to almost any subfloor. When dry it has a high bond strength between the wooden floor and the subfloor but remains permanently flexible. This allows the flooring to move as the seasons change but it will not crack, and the floor will stay adhered to subfloor. If any adhesive is left on the surface of the wood it is easy to remove either wet or dry (following day) and no special chemicals are required.

Rewmar MS Polymer flexible wood flooring adhesive revolutionised the way we think about wood flooring adhesives. With the advent of modified Silane polymers we now have a product that is suitable for use with all species of wood and on most forms of substrate. Added to that, we have a product that requires no hazard labeling so we can use it confidently knowing that it is safe for both the installer, the customer and the general environment. Our MS polymer is made using the highest quality market leading silane base and fillers, which produces a flexible wood flooring adhesive of the very highest quality

The product is now second generation MS Polymer flexible wood flooring adhesive with a faster cure and higher bond strength. Rewmar MS Polymer flexible wood flooring adhesive is not only hazard free it also brings other practical advantages to the user.

  • Easy to apply by trowel
  • Easy to clean during and after use. No more black hands
  • Good coverage (approx. 1kg/m2) using 6mm V Notched trowel*
  • Can be stored part used so there is virtually no waste
  • Quick grab (open working time approx 20 minutes)
  • Moisture curing with a High final bond strength
  • Permanently flexible
  • Dissipates shear forces
  • Suitable for use with underfloor heating
  • Waterproof

*When comparing usage rates some manufacturers calculate the coverage using trowels with small notches. This tends to increase the coverage obtained but doesn't provide accurate guidance because small notched trowels will not generally apply sufficient adhesive to fix solid wood flooring

The waterproof properties of the product also make it the ideal choice when fully bonding the floor where there may be a doubt concerning the moisture content within the substrate