Motor Red Lens Brake Turn Signal LED Tail Light for Harley Dyna Softail Electra
Red Lens LED Tail Light Brake Turn Signals For Harley Tour Road King glide Dyna FXR
Description
Voltage:12V DC
Material: ABS Plastic
LED Quantity:60LEDs
Voltage:12V DC
Material: ABS Plastic
LED Quantity:60LEDs
Function(Lighting Color): Brake Light(Red),Turn Signal(Yellow, Left and Right), License Plate Light(White)
Package Included:1 PCS Red LED Tail Brake Light + 1 PCS Gasket
Upgraded Connector, Easier to install
Black Wire------Negative
White Wire-----Running
Red Wire-------Brake Light
Yellow Wire----Turn Right
Blue Wire-------Turn Left
Upgraded the connector, according to wire diagram, insert the wire to corresponding hole, directly plug in which get easier to install, but each model harness is different so we leave the wire end(running&brake) out of the plug for you, then you can insert them in the right position according to your model. Integrated turn signal lights, blue wire(turn left) and yellow wire(turn right) for you to connect according to your needs.
Connector
1. Please confirm the red wire(brake function) and white wire(running function) position
2. After confirm the position, then insert them in, and press the plug. Please double check red and white wire position before you insert them to the white plug of the taillight, because they can not be taken out from the plug once they are inserted into the white plug.
3.Integrated turn signal lights, using the yellow wire(turn right) blue wire(turn left) from the tail light, they can be connected to your current turn signals to add LED turn signal functions.
Note: Some old model it may need the resistor(package is not include) for turn signal if it is hyper flashing.
Black Wire------Negative
White Wire-----Running
Red Wire-------Brake Light
Yellow Wire----Turn Right
Blue Wire-------Turn Left
Upgraded the connector, according to wire diagram, insert the wire to corresponding hole, directly plug in which get easier to install, but each model harness is different so we leave the wire end(running&brake) out of the plug for you, then you can insert them in the right position according to your model. Integrated turn signal lights, blue wire(turn left) and yellow wire(turn right) for you to connect according to your needs.
Connector
1. Please confirm the red wire(brake function) and white wire(running function) position
2. After confirm the position, then insert them in, and press the plug. Please double check red and white wire position before you insert them to the white plug of the taillight, because they can not be taken out from the plug once they are inserted into the white plug.
3.Integrated turn signal lights, using the yellow wire(turn right) blue wire(turn left) from the tail light, they can be connected to your current turn signals to add LED turn signal functions.
Note: Some old model it may need the resistor(package is not include) for turn signal if it is hyper flashing.
Application:
All 1991-2010 FLST Models (except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE);All 2002-2010 FXST Models (except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCW/C);1991-2010 Electra Glides (except 2005 FLHTCSE, 2009 FLHT Standard) Harley Sportster 1200 dyna lowrider and etc;
