Easy2grow 2 Pot System with 47L Tank, Extension Kit & Easy2GO

Easy2grow 2 Pot System with 47L Tank

The easy2grow can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The easy2grow System is easily extended so many pots can be linked to a single tank. Please see examples of typical layouts using 6mm pipe or 16mm pipe. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plant’s needs.

Easy2grow System includes:
1x 47 ltr tank, lid & 6mm top hat grommet
1x 2Pot tray and lid
2x 8.5 litre pots (optional upgrade to 15ltr pots)
1x AQUAvalve
1x 6mm inline tap
2xPotSocks
2x marix discs
1x 1.5 metres of 6mm pipe
1x 6mm golf filter

Easy2grow Extension Kit
The easy2grow Extension Kit is supplied with the following;
1x 2Pot tray & lid
2x 8.5ltr pots
2x Marix discs – the Marix discs are placed inside each of the pots to prevent soil/compost from leaving the pots
2x PotSocks – the RCD’s are placed in the tray under each pot, gold face up. The RCD’s will prevent roots from leaving the pots and discourage them from heading towards the AQUAvalve.
1x single AQUAvalve with the 2Pot Extension Kit is placed in between the pots.
1x 1 meter of pipe
1x 6mm Tee for easy connection to the easy2grow Kit or existing systems.

Easy2Go Kit
From AutoPot, and now available in Alchimiaweb, we present the Easy2Go automated watering system, that - without any kind of power supply and with its unique AQUAvalve - will be responsible for watering our marijuana plants when we can not take care of them.

The installation is very simple, because we only need to place the plants we want to water on a growing tray of about 3cm deep, also placing the AQUAvalve device on it, which is connected to the irrigation tank.

When it starts to operate, it will fill the tray with about 2cm of water so that plants can absorb the needed nutrient solution to hydrate.

It is designed to operate connected to an irrigation tank of a minimum capacity of 30L. This system operates under gravity, so we have to place it higher than the pots that we want to water.

We don't need any water pump, neither electricity nor a timer, since it incorporates a mechanical system for regulating the water flow, which is activated when the level is low, being completely autonomous and automatic.

It detects when the tray is empty and fills it again without overwatering the plants. In this way, we can be sure that they are properly hydrated when we are away from home and we can't take care of them.

Easy2Go Kit features:
Automatic irrigation valve, with a float connected to the water inlet
Compatible with outdoor and greenhouse crops
Includes AquaValve + cover
Includes silicone tube
Includes thread for connecting silicone tube with threaded faucet or outlet
Includes connectors for tanks without faucet, where we will need to make a hole to enter the tube, in which we will fix the rubber joint and the filter screen.