USB to TTL AS608 Optical Fingerprint Reader Sensor Scanner Module Door Lock
Description
USB to TTL Serial AS608 Optical Fingerprint Reader Sensor Scanner Module Door Lock
USB to TTL:
USB To RS232 TTL PL2303HX Auto Converter Module
Adopt imported controller PL2303HX,which can stabilize the flash with high speed
500mA self recovery fuse for protection
Two data transmission indicator can monitor data transfer status in real time
Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation
State from outside,So that the board won't burnt down by material short cut.
Electrostatic package,insures the board will not be damaged before use
Support WIN7,Vista,XP system
Fingerprint Module:
Resolution: 500dpi
Supply current: <60mA
Supply voltage: 3.3V
Fingerprint image entry time: <1.0 seconds
Peak current: <60mA
Window area: 15.3x18.2mm
Communication Interface: USB/UART
How the Fingerprint Module Works:
1. Fingerprint features
The fingerprint algorithm extracts features from the acquired fingerprint image and represents the fingerprint information. The storage, comparison and search of fingerprints are all done by operating fingerprint features.
2. Fingerprint processing includes two processes: fingerprint registration process and fingerprint matching process (in which fingerprint matching is divided into fingerprint comparison (1:1) and fingerprint search (1:N) two ways).
When the fingerprint is registered, two fingerprints are entered for each fingerprint, and the input image is processed twice. The synthesis module is stored in the module.
When the fingerprint is matched, the fingerprint sensor is used to input the fingerprint image to be verified and processed, and then it is compared with the fingerprint module in the module (if it is matched with a module specified in the module, it is called fingerprint comparison mode, ie, 1:1 mode. If matching with multiple modules is called fingerprint search, ie 1:N mode, the module gives the matching result (pass or fail).
USB To RS232 TTL PL2303HX Auto Converter Module
Adopt imported controller PL2303HX,which can stabilize the flash with high speed
500mA self recovery fuse for protection
Two data transmission indicator can monitor data transfer status in real time
Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation
State from outside,So that the board won't burnt down by material short cut.
Electrostatic package,insures the board will not be damaged before use
Support WIN7,Vista,XP system
Fingerprint Module:
Resolution: 500dpi
Supply current: <60mA
Supply voltage: 3.3V
Fingerprint image entry time: <1.0 seconds
Peak current: <60mA
Window area: 15.3x18.2mm
Communication Interface: USB/UART
How the Fingerprint Module Works:
1. Fingerprint features
The fingerprint algorithm extracts features from the acquired fingerprint image and represents the fingerprint information. The storage, comparison and search of fingerprints are all done by operating fingerprint features.
2. Fingerprint processing includes two processes: fingerprint registration process and fingerprint matching process (in which fingerprint matching is divided into fingerprint comparison (1:1) and fingerprint search (1:N) two ways).
When the fingerprint is registered, two fingerprints are entered for each fingerprint, and the input image is processed twice. The synthesis module is stored in the module.
When the fingerprint is matched, the fingerprint sensor is used to input the fingerprint image to be verified and processed, and then it is compared with the fingerprint module in the module (if it is matched with a module specified in the module, it is called fingerprint comparison mode, ie, 1:1 mode. If matching with multiple modules is called fingerprint search, ie 1:N mode, the module gives the matching result (pass or fail).
