THIS IS FOR 1 EACH ITT CANNON ELECTRICAL CONNECTOR FOR AIRCRAFT, GROUND SUPPORT, TEST EQUIPMENT, INDUSTRIAL, ROBOTICS AN OTHER USES.
NEW, UNUSED OLD STOCK
P/N : MS3100R18-7S
NSN: 5935-01-261-8599
MFG: ITT CANNON
SOLD AS-IS.
SPECS:
| Thread Class | 2A and 2A | |
| Thread Direction | Right-hand and right-hand | |
| III Body Style | Straight shape, external coupling | |
| Overall Length | 2.500 inches maximum | |
| Overall Height | 1.375 inches nominal | |
| Overall Width | 1.375 inches nominal | |
| Environmental Protection | Moisture proof and salt water resistant and vibration proof | |
| Unthreaded Mounting Hole Diameter | 0.172 inches minimum and 0.187 inches maximum | |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.062 inches nominal | |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.062 inches nominal | |
| Distance from Mounting Shoulder to Front Face | 0.750 inches minimum and 0.781 inches maximum | |
| Threaded Device Type | Back shell and coupling facility | |
| Mating End Quantity | 1 | |
| Contact Position Arrangement Style | 18-7 single mating end | |
| Contact Removability | Removable single mating end single contact grouping | |
| Contact Maximum Current Rating in Amps | 73.0 single mating end single contact grouping | |
| Contact Maximum AC Voltage Rating in Volts | 1750.0 single mating end single contact grouping | |
| Contact Maximum DC Voltage Rating in Volts | 2450.0 single mating end single contact grouping | |
| Polarization Method | Keyway or multiple keyway | |
| Insert Position in DEG | 0.0 | |
| Shell Type | Solid | |
| Connector Locking Method | Externally threaded shell | |
| Nominal Thread Length | 0.290 inches and 0.625 inches | |
| Thread Quantity per Inch | 18 and 18 | |
| Nominal Thread Size | 1.062 inches and 1.125 inches | |
| Terminal Location | Back single mating end single contact grouping | |
| Contact Material | Copper alloy single mating end single contact grouping | |
| Contact Surface Treatment | Gold single mating end single contact grouping | |
| Insert Material | Rubber synthetic single mating end | |
| Contact Surface Treatment Document and Classification | MIL-G-45204 mil spec single treatment response single mating end single contact grouping | |
| Terminal Type | Crimp single mating end single contact grouping | |
| Shell Material | Aluminum alloy | |
| Shell Surface Treatment | Cadmium and chromate | |
| Shell Surface Treatment Document and Classification | QQ-P-416, ty 2, class 3 fed spec all treatment responses | |
| Included Contact Quantity | 1 single mating end single contact grouping | |
| Included Contact Type | Round socket single mating end single contact grouping | |
| Special Features | In order to complete the connector assembly, the user must obtain/provide the backshell. standard versions may be ordered as nsn 5935-01-177-9556, P/N M85049/52-1-18W for the straight style, or nsn 5935-01-174-3671, P/N M85049/51-1-18W for the right angle style. | |
| Precious Material and Location | Contact surfaces gold | |
| Precious Material and Weight | 0.005 gold grains, troy | |
| Precious Material | GOLD | |
| Test Data Document | 81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). | |
| Thread Series Designator | Unef and unef | |
| Specification/Standard Data | 96906-MS3450 government standard |
*CON2*