ARRI SkyPanel S120-C LED Softlight Blue/Silver L0.0012954 L0.0012955 L0.0012956
ARRI SkyPanel S120-C LED Softlight Blue/Silver
MFR# pick one(L0.0012954, L0.0012955, L0.0012956)
Please contact us for ETA
Please specify which plug you need from below. Contact us for any additional accessories.
| L0.0012954 | S120-C, Manual, Blue/Silver, 3m DC Cable, S60 PSU, PSU Rail Mount, Standard Diffusion Panel, Edison powerCON |
| L0.0012955 | S120-C, Manual, Blue/Silver, 3m DC Cable, S60 PSU, PSU Rail Mount, Standard Diffusion Panel, Schuko powerCON |
| L0.0012956 | S120-C, Manual, Blue/Silver, 3m DC Cable, S60 PSU, PSU Rail Mount, Standard Diffusion Panel, Bare Ends p/CON |
ARRI continues to literally broaden their LED line with the introduction of the wide-format SkyPanel S120-C LED Softlight. Supported by an aluminum yoke, the panel surface area measures 50.8 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. A Standard medium diffuser is included with the light. The SkyPanel outputs the approximate equivalent of a 2000W tungsten soft light while drawing a maximum of only 430W.
Using technology originally designed for the L7-C Fresnel, the SkyPanel S120-C is fully color tuneable, allowing output of a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full minusgreen to full plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your chosen color in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or an LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.
The SkyPanel S120-C can be used worldwide, thanks to its included 100-240 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin and a standard diffuser. This version of the light has a Manual Yoke.
Fully Tuneable, Precise Color Rendering
Incorporating features of ARRI's successful L-Series LED Fresnels, the SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel "C" (Color) versions are fully tuneable, meaning that correlated color temperature is adjustable between 2,800K and 10,000K, with accurate color rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible. Applications for this controllability range from quickly adjusting the CCT to set the mood of a scene, to selecting the chroma green output for green screen color keying. Each LED light engine is computer calibrated in order to ensure unit-to-unit and batch-to-batch consistency, as well as accurate color temperatures
Tremendous Output. One of the Brightest Soft Lights on the Market
High output is usually not associated with a fully tuneable LED fixture, but with the SkyPanel ARRI has been able to accomplish both. SkyPanel has tremendous light output across the entire CCT range. Brighter than a 2000W tungsten soft light, the SkyPanel S120 has more than enough light for most applications. In some cases, the fixture can even compete with natural sunlight; at the same time, it is able to perform impressively at lower light levels
True Soft Light Beam Quality
Soft lights are known for their smooth quality of light and even, uniform beam field. SkyPanel's combination of a precise selection of diffusion panels, LED mixing chamber and large surface area allow for the light output to wrap around objects, eliminating sharp shadows and making for an ideal beauty light. The beam field is homogeneous in both color and intensity
LED White Light Without Sacrifices
ARRI has always been at the forefront of LED white light color quality and SkyPanel lives up to this standard. Natural rendition of skin tones, accurate color reproduction and precise color temperature settings are all areas where SkyPanel excels. Whether you measure the color rendition using CRI (Color Rendering Index), CQS (Color Quality Scale) or TLCI (Television Lighting Consistency Index), SkyPanel performs impressively
Natural Shadow Rendition
Mixing some 2,000 calibrated red, green, blue and white LEDs into one homogeneous beam of soft light, the SkyPanel produces not just superior light quality, but excellent shadow rendering as well. The soft shadows cut cleanly without exhibiting multiple edges or color fringing
Easy to Use
The SkyPanel user interface is designed to be very easy to use, but also to make a wide range of controls available to the user, all at the same time. With three simple knobs, the color temperature, green/magenta point, intensity, hue and saturation can be adjusted instantly. Even people who have never used the light before find the interface effective and intuitive. In addition to the on-board controls, all functions can be remotely adjusted via DMX or LAN network connections
Versatility Built-In
While the SkyPanel was designed to be used primarily as a soft light to illuminate people, various built-in features make it extremely adaptable to other uses. The diffuser panels on the front of the lamp head are interchangeable, so going from the Heavy to the Lite diffusion panel can be done in a matter of seconds. The SkyPanel also makes an effective space light outputting a large downward-directed pool of color-controllable soft light through an optional silk cylinder
Battery Mode Included.
The SkyPanel's low power consumption allows the fixture to be operated in many locations, using many different sources of power. With the on-board battery input, SkyPanel can easily run off industry-standard batteries. Powerful, vivid soft light need no longer be tethered to the wall or generator. The S120 can be operated at up to 50% of its total power while on battery power
Bigger is Better
Having a diffused light source is not enough to make a true soft light. SkyPanel also has one of the largest light apertures in its power class; this substantial area contributes significantly to the soft quality of light and wrapping of the source around a subject. When it comes to soft light aperture, bigger is usually better
Thin Profile. Fit the SkyPanel into Tight Locations
The SkyPanel's thin profile permits the fixture to be used in tight locations where space is at a premium. The ability to tuck a SkyPanel right up against a wall and achieve the quantity and quality of light it produces would not be possible with a conventional fixture
Built to Last
Made in Germany to ARRI standards, the SkyPanel is constructed from resilient materials and assembled by hand. The combination of an aluminum core with fiberglass-reinforced thermoplastics results in a solid fixture that can withstand heavy daily use on busy film sets. The easily-serviced electronics have been designed to last beyond 50,000 hours
Highly Controllable
The SkyPanel user interface is designed for ease of use with a wide range of controls available to the user. Three simple knobs adjust the color temperature, green/magenta balance, light intensity and hue and saturation instantly. In addition to the on-board controls, all functions can be remotely adjusted via DMX or LAN network connections
Light Fixture
| Beam Angle | 110° |
| Color Temperature | 2800 to 10,000K ± 100K |
| Color Accuracy Standard | CRI 95 TLCI 90 |
| Cooling System | None |
| Dimming | Yes, 0 to 100% (Continuous) |
| Display | None |
| Expected Lamp Life | 50,000 Hours (L70) |
| Fixture Dimensions | 50.8 x 11.8 x 5.1" / 129.0 x 30.0 x 13.0 cm |
| Fixture Weight | 35.3 lb / 16 kg |
Connectors
| Power Input Connector | 3-Pin XLR, 4-Pin XLR |
| DMX Connector | 5-Pin XLR, EtherCON |
| Service Connector | USB Type-A |
Mounting
| Yoke Mount | TVMP/ Hex Bolt |
| Fixture Mount | 1-1/8" Stud |
| Accessory Mount | None |
Yoke
| Yoke Material | Aluminum |
Remote Operation
| Remote Control Type | DMX |
Power
| AC Input Power | 110 to 240 VAC, 50 / 60 Hz |
| DC Input Power | 23 to 36 VDC |
| Power Source | AC Adapter, External Battery |
Cable
| Cable Length | 9.8' / 3 m |
| Cable Type | powerCON to NEMA 5-15 |
Power Supply
| Power Supply Output | 48 VDC |
| Power Supply Power Connector | powerCON Input |
| Power Supply Dimensions | 15.0 x 7.6 x 3.5" / 383.0 x 192.0 x 90.0 m |
| Power Supply Weight | 7.7 lb / 3.5 kg |
Physical
| IP Rating | IP20 |
| Operating Temperature | -4 to 113°F / -20 to 45°C |
In the Box
- ARRI SkyPanel S120-C LED Softlight (Blue/Silver, Manual Yoke)
- ARRI Power Supply Unit for SkyPanel S60 LED Light (Blue/Silver)
- ARRI Standard Diffusion Panel for SkyPanel S120-C LED Light
- ARRI PSU Rail Mount Adapter for SkyPanel S30 and S60
- Limited 1-Year Warranty
| Package Weight | 57.5 lb |
| Box Dimensions (LxWxH) | 58.5 x 20 x 12" |
US Shipping (48 states)
- FedEx Ground delivery time (48 States) : 3-5 business days
APO addresses can only be delivered by USPS, if another option is chosen by the buyer, Studio AMG reserves the right to change the shipping method without consent from the buyer, but at no additional charge.
If you would like a quicker delivery time than is listed, please contact us on Skype and we will try to accommodate requests.
International Shipments
* All international buyers should confirm shipping prices BEFORE the purchase
* Due to shipping restrictions, this product cannot ship via FedEx to Russia. USPS shipping only
We do not ship with DHL or UPS - only FedEx and USPS
- USPS Priority International delivery time: 3-5 weeks*
- USPS Express International delivery time: 2-3 weeks*
- FedEx International Economy delivery time: 3-8 business days*
* Shipping times are estimates from past customers order dates to when they actually receive the product. The other USPS shipping times quoted on EBay come directly from USPS and are found to often be inaccurate. Studio AMG cannot be held responsible for delays in the shipment caused by the 3rd party shipping companies or the customs process.
Delivery time can vary and is greatly affected by both, the infrastructure of the shipping services and the customs process, in the destination country.
The buyer is fully responsible for obtaining information regarding customs charges in their country and paying any associated fees, Studio AMG does not pay the customs charge. If you have questions about customs or need assistance, contact us on Skype.
In the event that an item is more expensive to ship, the buyer will either be responsible for covering the additional costs to ship the item, or have the option to cancel the transaction entirely. Please confirm international shipping prices before bidding or buying by sending your destination shipping address and your desired shipping method that we offer.
* By buying or bidding on an item, you agree to the following:
In the event that a buyer chooses to return an item within 14 days, the buyer will be responsible for paying shipping fees back to our facility where the returned package will be inspected by our staff; this includes international buyers. If the item is deemed resalable as the condition in which it was sold, a refund will be given minus the original cost of shipping to the customer. In the case that the item cannot be resold in its original condition, a restocking fee and the original cost of shipping to the customer will be subtracted from the refund amount. This restocking fee starts at 20%, and may be higher depending on the condition of the item upon return (i.e. broken seals, ripped packaging, damaged product, missing accessories, etc.). If a package reaches the destination country and is refused by the buyer or is returned, the buyer will be responsible for the cost of all shipping charges to and from the country.
In an event the unit needs to be serviced under the manufacturer warranty, the buyer is responsible for contacting the manufacturer and paying for any shipping fees associated with service or repair. Your receipt from PayPal is the only receipt that is issued and is used for proof of purchase with manufacturers.
International buyers are responsible for researching manufacturer warranties in their country. Studio AMG is a United States seller, providing United States products with full U.S. warranties. In the event that a product is damaged upon arrival or the buyer wishes to return the product for any reason, they will be responsible for any shipping charges back to Studio AMG.
Please contact us with any additional questions as we cannot be held responsible for incorrect assumptions or questions that were not asked before the purchase or bidding.
