Description
GPS Disciplined Clock Oscillator Frequency Standard for GPS BD Square Wave tpys
Features:
- GPS/BD dual-mode disciplined clock.
- Built-in 10MHz SC-cut OCXO.
- Output 1-channel 10MHz clock signal (Square Wave).
- Output 1-channel 1PPS timing pulse (synchronized to GNSS).
- GPS/BD Beidou dual-mode satellite navigation receiver collects more available satellites at the same location at the same time.
- Small size and high performance. Second stability is better than 5E-12. 1-1000s frequency stability is greater than 2E-11. Over 10000s frequency stability is better than 2E-12.
- Optimized digital phase-locked loop algorithm and hardware circuit.
- 5V power supply, starting power consumption is less than 4W, and steady state power consumption is less than 2W@25C.
- USB communications port for configuring GNSS receiver NMEA messages via USB.
Interfaces:
Front Panel:
- PWR: Power Indicator. It is on when the clock is powered on.
- TRACK: GNSS Tracking Indicator. When it is flashing, it indicates that it is tracking GNSS to correct OCXO frequency offset.
- GNSS: Satellite Navigation Receiver Indicator. It is on when the receiver works normally.
- COM: Communications Indicator. It flashes when there is data transmission.
Ports:
- USB: Micro USB Communications Port.
- 5V DC: 5V Input Port for DC Power Adapter. Input Voltage 5V-5.5V and 1A.
Rear Panel:
- GNSS Antenna: GNSS Antenna Input with 3.3V feed.
- 10MHz: 10MHz Clock Output. 5V Square wave.
- 1PPS: 1 Second Timing Pulse Output. Valid rising edge with positive pulse width 100ms and 5V HCMOS.
Package Included:
- 1 x GPS Clock
- 1 x 5V/1A Power Adapter
- 1 x USB Cable 1M
- 1 x GPS/BD Dual-Mode Antenna 5M
Features:
- GPS/BD dual-mode disciplined clock.
- Built-in 10MHz SC-cut OCXO.
- Output 1-channel 10MHz clock signal (Square Wave).
- Output 1-channel 1PPS timing pulse (synchronized to GNSS).
- GPS/BD Beidou dual-mode satellite navigation receiver collects more available satellites at the same location at the same time.
- Small size and high performance. Second stability is better than 5E-12. 1-1000s frequency stability is greater than 2E-11. Over 10000s frequency stability is better than 2E-12.
- Optimized digital phase-locked loop algorithm and hardware circuit.
- 5V power supply, starting power consumption is less than 4W, and steady state power consumption is less than 2W@25C.
- USB communications port for configuring GNSS receiver NMEA messages via USB.
Interfaces:
Front Panel:
- PWR: Power Indicator. It is on when the clock is powered on.
- TRACK: GNSS Tracking Indicator. When it is flashing, it indicates that it is tracking GNSS to correct OCXO frequency offset.
- GNSS: Satellite Navigation Receiver Indicator. It is on when the receiver works normally.
- COM: Communications Indicator. It flashes when there is data transmission.
Ports:
- USB: Micro USB Communications Port.
- 5V DC: 5V Input Port for DC Power Adapter. Input Voltage 5V-5.5V and 1A.
Rear Panel:
- GNSS Antenna: GNSS Antenna Input with 3.3V feed.
- 10MHz: 10MHz Clock Output. 5V Square wave.
- 1PPS: 1 Second Timing Pulse Output. Valid rising edge with positive pulse width 100ms and 5V HCMOS.
Package Included:
- 1 x GPS Clock
- 1 x 5V/1A Power Adapter
- 1 x USB Cable 1M
- 1 x GPS/BD Dual-Mode Antenna 5M
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
