Dynamic Track Camera Processing ACC 12V Sharer and Installation Guide for CAN + and CAN- for RCD330 PLUS.

https://www.youtube.com/watch?v=y_ljxXBKMAk

This camera will automatically activate the backup camera function of the head unit.

The Camera Built-in Dynamic Trajectory Chip. Support Trajectory Parking Line

-Installation requirements: ESP. vehicle brand must have ESP function,

Use with radio host with CVBS video input, such as rcd330, rcd340, Desay 187a, Desay 187B, no name 187A, no name 187B .

Not applicable to rcd510 / rns315 / rns510.

For Jetta MK6 (After 2011) / Tiguan / Touran / Passat B6 and B7.

Please note that:

-The installation is very simple, even simpler than a camera without a dynamic track. Just lay the cable from the instrument panel to the trunk, install the camera, and connect the CAN+ and CAN- cable to ISO quadlock or gateway, so that the camera can receive data from the CANbus and display the dynamic track.

-No delay is required because it has a built-in delay.

-It is also suitable for MQB vehicles manufactured after 2015.

-If you have any questions, please contact me.

The installation experience from a customer, thank you very much for this customer. This video is also suitable for Jetta, Passat, some of Touran and caddy.

https://youtu.be/QondYFTdLxY

Features:

1) CCD Digital trajectory image sensor designed for VW MIB Stereo Original Screen , it don't need a CANBUS decode . support original steering wheel Dynamic trjectory line control . 2) Real 150 degree wide viewing angle.6 Glass Lens . 3) Installed in the Rear Trunk handle , 6m Video cable connection Stereo monitor, Reversing, the monitoring system automatically start working, you can clearly see the car Rear the situation . 3) -30 to 60 temperature range of application, The factory after the high pressure water immersion test and 12 hours on the electrical aging test, multilayer waterproof design, truly high pressure washing and immersion .