Pair of Stepped Cat 1 / Cat 2 Tractor Lower Link Pins, with 5mm R Clips.
Cat 1 section 13mm long from shoulder to edge of 1st pin hole, 75mm from shoulder to edge of 2nd pin hole, 55mm between pin holes.
Cat 2 section 85mm long.
(Cat 1 = 22mm (7/8") diameter, Cat 2 = 28.575mm (1.1/8") diameter)
Please note, all linkage pins are standard sizes, Cat 0, 1, 2, 3 or 4, unless stated otherwise,
all measurements are approximate & are intended as a guide only.