Fuse Box Assembly - Yamaha RD400 FZ600 XS360/400/500/650/750/850/1100 - With fuses
Universal fuse box assembly for many different Yamaha models listed below. Most of these models did not have a removable fuse box from the factory, so you will need to splice this box into your existing harness using the supplied connectors. This creates a much better system because after the work is done it can be easily unplugged. The two mounting points can be used or just zip tie it in place.
Tired of dealing with the stock corroded / melted fuse box that's missing the cover? Now's the time to pick up a new assembly and stop breaking down because of a blown fuse!
Specifications:
Comes with three 10A and one 20A fuse installed - if these don't match the stock system just swap them out.8 Pin female terminal connector installed
1 Male 8 Pin terminal connector
8 Male spade terminals
Wire harness length: 9.5" (measured to end of the white plug)
Wire colors: 2 red, 2 red/yellow line, 2 brown, 2 red/white line
Mounting holes = 94mm (3.7") measured center to center
Box dimensions = 3 1/8" x 2 3/8" x 3/4" (excluding mounting points)
Fits Yamaha models: (Modification to stock wiring is required)
