This posting is for 1 name and up to 2 numbers. The name will be 2" in height and the width will depend on number of letters in the name in all caps up to 8" in width. The numbers will be 6" in height and up to 8" in width. All Orders with Name and Number will be properly spaced and ready to apply.  If you want to change the spacing, simply cut the decal apart with scissors and place where ever you would like. This vinyl can be applied with a household iron or professional heat press. 

Size : 
Name 2" tall 
Number 6" tall
Overall Width for Names is 8" max.

INCLUDES:
 1 NAME AND UP TO 2 NUMBERS

Recommended Fabrics:
1.- Cotton
2.- Poly/Cotton blends
3.- Polyester

During checkout please click "message to seller" or send a separate message with the following:

1. NAME (exact spelling, all orders will be made in UPPER case)
2. NUMBER (2 digits max )

APPLICATION INSTRUCTIONS:

HOUSEHOLD IRON INSTRUCTIONS:

1. Remove all water from iron
2. Prepare iron at 330 degrees F (high temp) for 6-8 minutes
3. Place garment on hard surface like (table or counter top) DO NOT USE AN IRONING BOARD
4. Pre-press garment for 5 seconds to remove any moisture from fabric
5. Remove wax paper backing from the transfer decal
6. Place transfer face down (sticky side), carrier sheet side up on garment in desired location
7. Leave carrier sheet on while applying heat
8. Press each section covered by the iron for 15-20 seconds with medium pressure
9. Peel backing (carrier sheet) when warm to touch.

 
HEAT PRESS INSTRUCTIONS:

1. Set heat press at 300-340 degrees F
2. Pre-press garment for 5 seconds to remove any moisture from fabric
3. Remove wax paper backing from the transfer decal
4. Place transfer face down (sticky side), carrier sheet side up on garment in desired location
5. Leave carrier sheet on while applying heat
6. Press for 20-30 seconds with medium pressure
   
7. Peel backing (carrier sheet) when warm to touch.
8. 
   

*Please know because this is a custom item there will be no refunds or exchanges. All sales are final*