INTERNATIONAL
MICRON 1 ANTIFOULING PAINT
BLACK - 4 LTR


Micron® One
Ablative Antifouling
Micron One is a high strength general purpose ablative antifouling
based on cuprous oxide combined with zineb an effective organic
biocide. It can provide good protection in heavy fouling areas for
periods of up to 12 - 18 months.
History
Micron One is very much a traditional type ablative antifouling that has been
around for over 20 years under various names in Australia, New Zealand and
the Pacific Islands and has remained a very popular product for the smaller
type pleasure boats where a cost effective simple to use product is required.
Product Features and Benefits
• Excellent all-round performance.
• Cost effective.
• Easy to use and apply by brush/roller for DIY and spray by professionals.
• Wears away reducing build-up of old antifouling.
• Tolerant of climatic conditions during application.
• Easy to recoat.
• Two coats at 6sqm/litre for best performance.
Systems and Compatibility
• For use on fiberglass, epoxy, timber, steel substrates after suitable priming.
• Can be applied over numerous primer types (where available) such as
Interprotect, Gelshield 200, Primocon, Primocon Pro and Epoxy Tiecoat.
Drying and overcoating/recoating information
• Must be immersed within 1 - 3 months depending on temperatures, refer
to data sheet for more details.
• Unlike other antifoulings in the International range Micron One should not
be left out of the water for prolonged periods.
• Micron One can be applied over most other antifoulings after basic surface
preparation. Not recommended to be applied over Micron 77, Micron 99
or similar type self polishing copolymer products as its performance
characteristics are unlikely to meet customer expectations.
Product Data
Colour and code: Red (YBA541), Blue (YBA543), Black (YBA544)
Cleaner/thinner*: International Antifouling Thinner No.3
Number of coats: 2
Application method: Airless Spray, Airmix, Brush, Roller
Practical coverage: 5.4m²/L per coat by brush, 3.2m²/L by spray