- Craft / Ferrite -make your own
- Flexible - strip, paper, signs
- Whiteboard / Fridge Magnets
- Magnet Testing Equipment
- Neodymium Blocks
- Neodymium Disks / Rods
- Neodymium Cubes
- Neodymium Rings
- Neodymium Spheres
- Neodymium - Self Adhesive
- Neodymium N52 - High Grade
- Neodymium High Operating Temp
- AlNiCo (Alcomax)
- Samarium Cobalt
- Fuel Magnets
- Limescale Magnets
- Magnetic Therapy
- Magnetic Toys
- Pot / Anchoring Magnets
- Special Offers
- Made In UK
- Arc Segments
- Other
1 metre 1/2" (12.7mm) wide flexible, self adhesive magnetic strip craft fridge
- £2.690
- Width - 12.7 mm (0.5")
- Thickness - 1.5 mm (1/16") +/- 0.25mm manufacturing tolerance.
- Length - 1 metre +2/-0cm cutting allowance. NOTE: This product is cut from a 30metre reel by being measured on a steel ruler which ensures that every single millimetre is fully inspected and confirmed magnetised before it is disPatched.
- This magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip.
- The outside edges have the same polarisation; when brought together, they do not line up but are offset by the width of the magnetic bands. If perfect alignment is required, please see our matching pair.
- Grade - Flexible C1 (MGOe 0.85)
- Coating - Strong TESA 4965 Adhesive on one side. NOTE: red or pink plastic backing to protect the adhesive.
- Maximum Temperature 50°C / 122°F
- Theoretical Maximum Pull - 104g per centimetre of length
- Calculated Max Vertical Hold-guidance only - 16g-20g per centimetre of length including the weight of the strip
This isotropic ceramic strip magnet is only magnetized on one side and is multipolar. It can be easily cut with a craft knife or with sharp scissors. It is ideal for craft projects since the unmagnetized surface has a very strong acrylic adhesive backing known as TESA. The adhesive is protected by a red plastic easy to peel backing to keep it dust and fluff free. Simply cut to size, remove the easy to peel backing plastic and stick the magnet directly to your item.
The easy peel backing is great for little hands, fat fingers and short nails!
Ideal for making for fridge magnets out of:
- images
- moulding clay
- wood
- plastic
- and other craft and educational projects.
For other lengths or for the matching B form please see our variation listings.
NOTE: Stainless steel appliances are either not or only barely magnetically attractive and flexible strip is not strong enough to overcome this. This item requires direct contact with an iron/steel surface.