RISLONE LIQUID Copper COOLING SYSTEM, RADIATOR and gasket repair 500G



  • Repairs cracks
  • Stops leaks
  • One Step, No Draining Required
  • Antifreeze Compatible Sodium Silicate Formula
  • Permanent Cooling System Repair
  • Works with All Types of Antifreeze or Water

Rislone Liquid Copper™ Block Seal Intake & Radiator Stop Leak seals larger leaks regular stop leaks won’t. One step formula permanently repairs larger leaks in radiators, intake manifolds & gaskets, heater cores, blocks, heads and welch plugs. Use on cars, trucks, vans, utes, SUV’s and RV’s.

One “1” Step Sealer contains an antifreeze compatible sodium silicate liquid glass formula, so no draining of the cooling system is required. It will not harm the cooling system when used properly. Use with all types of 50-50 mix antifreeze including conventional green or blue (Silicate-based) and extended life red/orange or yellow (OAT /HOAT) coolant.

DOSAGE:

Use – 1/2 (half) bottle in a small cooling system, such as 4 cylinders with no A/C.

For other small systems use approximately 20 mL per litre of cooling capacity.

Use 1 (one) bottle for regular size systems, which are for most 4, 6, 8 and 10 cylinder engines.

For larger systems, use 1 bottle for every 23 litres of cooling system capacity.


DIRECTIONS:

  1. Allow engine to cool. Make sure engine is cool enough so radiator cap can be safely removed.
  2. Shake well. Pour LIQUID COPPER™ BLOCK SEAL directly into radiator. If using in a small cooling system, such as 4 cylinders with no air conditioning, install ½ of bottle. TIP: When you do not have access to your radiator, remove top hose where it connects to the top of the radiator and install product in hose. Reattach hose and tighten clamp. If you have a pressured overflow tank, you can install in tank.
  3. Fill radiator and overflow tank to proper level and reinstall radiator cap.
  4. Turn heater on hot and fan on high.
  5. Start vehicle and idle engine for 10 to 15 minutes.
  6. Turn vehicle off and allow engine to cool until safe to open cap.
  7. Top off radiator and leave Rislone LIQUID COPPER™ in the cooling system for continued protection. Drive vehicle as normal.


PERMANENTLY FIXES COOLING SYSTEM LEAKS

Sealing Liquid

Stop Leak Fibres

Liquid penetrates large and small leaks in plastic, aluminium and cast iron intakes, heads, blocks and radiators.



Fibre additives lock together with liquid to increase strength and promote a permanent seal in
gasket leaks.