Feature :

Minimum Effort. Maximum  Efficiency Easy to control  - tools stops immediately after deactivation via electronic brake Dual-activation mode – Simply push tool or press button to begin Precise or Power – Mechanical clutch with 5 torque settings and maximum performance mode Mechanical Clutch – Precise with 5 torque setting and maximum performance mode Electronic Brake – easy to control as the tools stops immediately after deactivations Ergonomic – easy to grip when working in multiple positions ¼” HEX Bit Holder – highly flexible, fits to all possible bits Strong spindle – Shift between manual and power mode Speed: 360RPM – deliver fast and smooth operation while still maintaining the same powerful performance Comes with a 6 months warranty Specifications : Voltage : 3.6 Battery (Ah) : 1.5 Torque (Nm – Hard/Soft/Min) : 5/2.5/0.2 Speed (RPM) : 360 Electronic Brake : Yes Smart Stop : Yes Activation Mode : Push Start & Press Button Mechanical Clutch Settings : 5 + Maximum Performance Mode Charging Port : Micro USB Tool Holder : ¼” Inter HEX FAQ : 1)How to start the tool? - Select the direction from F/R switch and push the tool OR Press the button 2)Can this tool use as a manual screw driver? - Yes, put the F/R switch to neutral position, then the tool can be used as manual screw driver 3)How much screws can be done per charge? - Approx. 196pcs 3.5x35mm screwing into softwood, - Approx. 200pcs 3x60mm machines screw into plastic. 4)Where is the charger for the tool? - All SKU doesn't come with a charger. However you can use your phone USB adaptor to charge the tool with supplied micro-USB cable 5)When should I charge the tool? - When the battery capacity is below 33%, the charge indicator LED will start to blink during activation. This indicate the tool should be charge. 6)How to know when the tool is fully charge? - During charging process, the charge indicator LED will blinking continuously. After full charge, the LED will stop blinking and stay ON. 7)What's the charging time? - 90min for 100%. 60min for 80% 8)Can I use the tool while charging? - No, the tool won't work once start charging. 9)How is the performance of the tools? - It is same powerful as previous generation, however is more precise with mechanical clutch now 10)How to select the right torque? -The torque setting has 5 levels, which shows from small screw to big screw. The tool will start clutching once reach the desired torque. Turn to Max mode for full power. Note: When set to Max mode, tool won't stop. it will stop only if reach the maximum torque of the tool.