Brand new oil line swap kit ready to install for all early model seadoos with 587, 657, 657x and 717 engines. Will not fit newer engines (787 to 951). Kit includes all parts needed to swap your small oil injection lines safely and quickly, ready to install. Just cut off your old lines and push on the new ones, and gently crimp the clamps. No need to measure lines or anything, they are already the correct length and diameter. You can do it in 5 minutes with this kit.  Just need to bleed after or idle engine with fogging oil for a little bit. 

The clamps included are OEM made in Germany oetiker stainless steel double pinch clamps just like you find from the factory. The oil line is the same size replacement as original factory lines and is fuel/oil resistant made in USA Tygon line (Manufacturer: Saint Gobain). This is the real stuff and not cheap knock off material that has been known to deteriorate. Better than the original lines. If you've been around seadoos you know the oil lines crack and cause engines failures all the time, and are the leading cause of engine failures on 2 stroke seadoos. It's not the oil pumps that typically fail, it's the lines. Changing the lines is not hard, and its not dangerous. You just have to crimp the clamps with oetiker pliers or side cutters gently enough to retain the lines and make sure you dont overtighten them and rip the lines. You won't need to do it again for another 5 or 10 years if you do it right. And you can rest assured you won't starve your engine for oil and blow it up, a sad but common story on these old skis. If you have the original oil lines on a 2 stroke seadoo your ski is a ticking time bomb, and full engine rebuilds typically run in the $800+ range. I know because I do them. It's not worth chancing. If you have your Seadoo torn down, consider changing the fuel lines and redoing the carbs with stainless screws as well (see my other items).

Blake: 989-492-8053