HIGHEST QUALITY PINE SLIVERS FOR ALL SIZE GAPS UP TO 8MM!!!! 

Highest trade produced quality slivers - made using SOLID RECLAIMED PINE 

Fill gaps between floorboards with easy-to-fit 'Old Pine Slivers' to give your floor that professional finish! "Slivering" quickly and easily fills those unsightly gaps in between wooden boards with wedges of old reclaimed timber.  Available in both100cm (1 metre) or 50cm (1/2 metre) lengths.

The Old Pine Sliver is made from genuine old reclaimed floorboards, reclaimed joist and other reclaimed timber items.  Colours may vary from Light to Dark - this cannot be guaranteed. Nail holes  and knots may commonly be visible in the slivers - this is not unusual and these do not affect use. These slivers are not perfect as they are made from original reclaimed timber.  We always supply over the stated meterage in our packs - there is always an additional sliver or two supplied to ensure you have the meterage you require/order. 

Use the OLD PINE Sliver to give your floor that professional finish.

Slivering fills the gaps in between wooden boards with wedges made of old reclaimed wood.

  • Seals better
  • Stops draughts - no cold air through gaps
  • Stops odours
  • Tightens floors up, keeping it solid
  • No visible edges
  • Gives a lasting and satisfying finish to your floor
Simple to use:

1) Apply wood adhesive on both sides of a sliver (glue not included).
2) Place the sliver in a gap and hammer it in.
3) Cut the excess once the glue is dry.
4) Your floor is now ready for sanding and finishing.

Some tips to help prevent the slivers from shrinking:

·   Ensure that all carpets/flooring is removed and that the natural floor boards are exposed for at least three weeks prior to slivering.  The boards will then acclimatise to their ‘new’ natural environment (uncovered).

·   If painting or plastering the room please allow at least three weeks before fitting slivers.  Painting and Plastering brings moisture to the air and this can cause shrinkage.  Some customers like shrinkage and believe this adds to the ‘rustic’ look of the floor and makes it look less like a laminate floor other.

We have been trading for over 30 years and have fantastic feedback - don't accept second rate imitations.  

**PLEASE NOTE 10mm and 12mm SLIVERS ARE A BESPOKE ORDER AND CAN TAKE AN ADDITIONAL FEW DAYS TO MAKE - SO DELIVERY WILL BE LONGER**

**As per picture shown in the listing the 10/12mm slivers nose is approx 4-5mm - it is not a point - it is more of a stump/wedge*