|
Application:
This item is a
three-directions micro adjustable screen printing head; It can
be adjusted through the knob up and down in 6.7 inch ,
forward and back within 1 inch, left and right in 1 inch.
Character:
With the screws under the balance frame,
the lifting angle and height of the screen frame can be adjusted
as required.
This machine is equipped with 2 gravity
balance plates, which can be installed individually or together
according to the request. The gravity balance plate can move
forward and backward in 4 inch.
Micro adjustment operation:
Height adjustment: Place
the screen frame flat on the platform. According to the
substrate height or printing requirements, rotate the handle up
& down to reach an appropriate height, then lock the height with
the two rear positioning handles.
Left and right adjustment: loosen
the handle on both sides of the press, and rotate the handle to
move slightly left and right as required, after adjustment
tighten both handles.
Back and forward adjustment:
First, slightly loosen that four red knobs overhead the
clamp, then loosen the metal knobs on both sides of the clamp
and move front and rear as required. After adjusting, tighten
the metal knobs and four red knobs on the top.
|
