AC Triac RF + Push Dimmer (S1-B)
RF dimming/Leading edge or trailing edge/Min brightness settable/Push Dim/Wall junction box mounting
Features:
● RF + Push AC phase-cut dimmer, 1 channel output.
● To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.
● 256 levels 0-100% dimming smoothly without any flash.
● Leading edge dimming or trailing edge dimming set by dip switch.
● Min brightness can be set by key.
● Compatibility with Skydance’s 2.4G single zone or multiple zone dimming remote control.
● Connect with external push switch to achieve on/off and 0-100% dimming function.
● Easy to be placed in standard wall junction box behind a push switch.
How to Match Remote Control?
End user must be pair the remote to the receiver before using,the steps as follows:
*** Match:
Short press match key, immediately press on/off key of the remote.
*** Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.
What kind of Lamps compatiable with ?
● Dimmable LED lamps, Maximum load 200W @ 220V, 100W @ 110V, Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to dimmer.
●Triac Dimmable LED drivers,Maximum load 200W @ 220V, 100W @ 110V, Maximum permitted number of drivers is 200W divided by driver nameplate power rating, and make sure the surge current is no more than 2 times 65A.
●Incandescent lighting and HV Halogen lamps, Maximum load 400W @ 220V, 200W @ 110V.
Main Functions:
One S1-B receiver can be controlled by max 10 pieces remote within 30m distance
1. All the receivers sync working in the same zone.
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be limitless.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
2. Multi-Zone independently working in different zone.
Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
