| These are clear self adhesive laminated vinyl stickers which are designed to replace worn and rubbed off stove/cooker/oven markings. The print colour is BLACK. They are suitable for a silver or white appliance. They are NOT suitable for a black appliance In the listing photos the edge of each sticker is outlined in magenta but this is only for illustrative purposes to show the inner and outer dimensions. The magenta coloured lines are not printed on the version you receive. The stickers are made of heat resistant material and will withstand boiling water and will self extinguish if subjected to a flame test. The print is protected by a thin layer of transparent vinyl and as a consequence they are able to withstand normal cleaning with a cloth. Please note these stickers are not calibrated or designed for any specific oven or stove. The buyer should check to ensure the sticker symbols being applied match those being replaced. Mismatched symbols can be a safety hazard. If you are replacing old worn symbols try to make sure all remnants of the old symbols (if any) have been removed otherwise you will see the old under the new which doesn’t look good – but be gentle – you don’t want to damage the stove’s surface whilst trying to remove old lines. Before applying the stickers please ensure the oven/cooker hob surface is very clean and thoroughly dry before attempting to position the sticker. The stickers simply peel away from their paper backing (you might need to bend the backing around the edge of each sticker to allow the sticker to be peeled away). Once in position, gently rub the sticker to remove any air bubbles. The print colour is only available in BLACK which shows well on a silver or white stove. Black print will not work with a black stove If you require white print please message us Thank you |