Repair kit for Bosch Warm Up Regulator with double vacuum adjustment. Suitable for repairing the following Bosch part number:
0438140101
Mercedes380 SE, SEL [126] |
150-160kW |
3.8L |
04/1981 - 08/1985 |
Mercedes 380 SEC [126] |
150kW |
3.8L |
10/1981 - 07/1985 |
Mercedes 380 SL, SLC [107] |
150-160kW |
3.8L |
09/1981 - 08/1985 |
Mercedes 500 SE, SEL [126] |
170-177kW |
5.0L |
04/1981 - 08/1985 |
Mercedes 500 SEC [126] |
170kW |
5.0L |
10/1981 - 08/1985 |
Mercedes 560 SL, SLC [107] |
170-180kW |
5.0L |
09/1981 - 12/1985 |
For a restoration that is true to the original, all visible screws and parts (except for the Banjo Bolt ) are yellow zinc-plated like the original and are of selected quality. All parts required for the repair are included:
1x housing seal
1x sealing ring for pressure chamber
1x sealing ring for bimetal heating
4x case screw
4x housing nut
4x pressure chamber screw
4x copper sealing ring
1x washer for bimetal heater
1x spring ring for bimetal heating
1x nut for bimetallic heater
2x mounting screw
2x spring washer
Textile membrane made of membrane material from the original parts manufacturer, spring plate, adapter, spacer ring, knurled nut, stainless steel membrane and plastic membrane, all of excellent quality made in Germany.
The instructions are so detailed that a repair is also possible for laypeople! The instructions will be emailed to you as a PDF.
If there are any questions or ambiguities during installation, adjustment or calibration, we will also be happy to help over the phone.
___
0438140101
Mercedes380 SE, SEL [126] |
150-160kW |
3.8L |
04/1981 - 08/1985 |
Mercedes 380 SEC [126] |
150kW |
3.8L |
10/1981 - 07/1985 |
Mercedes 380 SL, SLC [107] |
150-160kW |
3.8L |
09/1981 - 08/1985 |
Mercedes 500 SE, SEL [126] |
170-177kW |
5.0L |
04/1981 - 08/1985 |
Mercedes 500 SEC [126] |
170kW |
5.0L |
10/1981 - 08/1985 |
Mercedes 560 SL, SLC [107] |
170-180kW |
5.0L |
09/1981 - 12/1985 |
For a true to original restoration all visible Screws and Parts (except for the banjo bolts) are yellow zinc plated and of excellent quality. The set contains all parts that are needed for repair:
1x Housing Gasket
1x O-Ring for Pressure Chamber
1x O ring for heating unit
8x Housing Screw (two different lengths for all housing types)
4x Housing Hex Nut
4x Pressure Chamber Screws
4x copper washers
1 x washer for heating unit
1x Spring Washer for Heating Unit
1x Hex Nut for Heating Unit
2x mounting screws
2x spring washers
If you need help or have further questions while assembly, we can also advise you by phone.