FRAM mikroBUS Module, MB85RS256A, 256Kbits, 3V3 SPI (FRAM click)

MIKROE-1486
FRAM mikroBUS Module, MB85RS256A, 256Kbits, 3V3 SPI (FRAM click)


  • 256 kilobits (32,768 words × 8 bits) of Ferroelectric RAM
  • High endurance: 10 billion reads/writes
  • Able to retain data without using backup battery
  • SPI communication (25 MHz max. clock frequency)
  • FRAM Click brings 256Kbits (32,768 words × 8 bits) of Ferroelectric Random Access Memory to your design. It features a Fujitsu MB85RS256A which uses the ferroelectric process and silicon gate CMOS technologies for forming the non-volatile memory cells. It is able to retain data without using a back-up battery. The memory can be used for 10 billion read/write operations and does not take a long time to write data, unlike Flash memories or EEPROM.

    Note: This board is designed to use 3.3V power supply only.

    Because FRAM is able to write at high speed even though it's a non-volatile memory, it is suitable for log management, storage of resume data, etc.

    FRAM Click communicates with the target board microcontroller via mikroBUS SPI (MISO, MOSI, SCK, CS), RST and PWM lines. The maximum SPI operating frequency is 25 MHz.

    The board contains two useful pins: HOLD and WP. The HOLD pin is used to interrupt serial I/O without de-selecting the chip. The WP (write protect) pin is used to control writing to a status register.

    mikroBUS Click Boards Overview

    Click boards come with header pins that you must solder yourself. After that, they just plug directly into a mikroBUS socket. mikroBUS is a specially designed plug-and-play pinout standard. Newer (v7) development systems manufactured by mikroElektronika, which we carry, have mikroBUS sockets already built in.

    You also can connect Click boards to many other popular platforms via these adapters:

    • PC — Click USB Adapter (MIKROE-1433)
    • Arduino — Arduino UNO click shield (MIKROE-1581)
    • Raspberry Pi — Pi click shield (MIKROE-1512)
    • BeagleBone Black — BeagleBone click shield (MIKROE-1596)
    • STM32F3 Discovery — STM32F3 Discovery Shield (MIKROE-1447)
    • STM32F4 Discovery — STM32F4 Discovery Shield (MIKROE-1481)
    • Stellaris LM4F120 LaunchPad / Tiva TM4C123G LaunchPad — Click BOOSTER PACK (MIKROE-1363)

    In addition, it is royalty-free to add mikroBUS to your own designs. Visit the mikroBUS Category to see the full line of Click boards.

    FRAM Add-on Module Resources