This is a manufactured Injection Molded part like the original RING button but much stronger and UV protected - Not a cheap 3D printed part
Has your ring doorbell pro button cracked or broke. Replace now so you can make it water tight again and make it look brand new.
Only works on the Rind Doorbell Pro - Check photos to see if compatible. If you have an Ring Doorbell Elite, please see my other listing - https://www.ebay.co.uk/itm/185037682101
Manufactured to the highest quality to be an exact replica of the current ring doorbell pro button.
Supplied : 1 x replacement button ONLY (nothing else supplied i.e no Ring Doorbell unit included and no tools)
Tools Need (not supplied): small Philips head screwdriver and a plastic spudger or knife
**Update** - Lots of customers have had great luck, just pulling out the cracked button with pliers and then lining up the new button and pushing it into place. Please make sure you are careful pulling it out and just the button, then just make sure the new button alignment holes are aligned correctly before pushing in place.
Video Guide here: https://www.youtube.com/watch?v=-6BL2PEQK74
Fitting guide:
- Four screws from the back of the main housing.
- Four screws to the main board (two black, two silver screws)
- Detach three connectors (two white and one black, carefully)
- Do not remove any other connectors as they a small and very easy to break or damage.
- Only tilt main circuit board forward, this reveals the back of the push button
- Unscrew the screw that holds the centre of button.
- Now, button drops out the front and you can careful remove broken cover, gently pry off old button cover.
- Line up new button cover to the base of the button mount.
- Carefully. As it’s still on a circuit ribbon, you don’t want to tug it.
- Once new cover is lined up. Refit button (don’t forget the spring) and refit unit
Top Quality Guaranteed - Any issues just contact me for a replacement.
**Update** - Lots of customers have had great luck, just pulling out the cracked button with pliers and then lining up the new button and pushing it into place. Please make sure you are careful pulling it out and just the button, then just make sure the new button alignment holes are aligned correctly before pushing in place.