Description:
This 1/10 60A Sensored Combo set is ready to run out of box, coming with 60A ESC,Motor and Program Card.
This combo is perfect for 1/10th scale Car. When you connect the ESC with the program card, you could tune and tweak all your favorite settings such as cut-off voltage, brake andpunch strength, drag brake and other parameters that add up to an incredible RC driving experience.
Hight RPM precision bearings.
High temperature neodymium magnet.
Sensor-based for excellent torque and low-speed drivability.
CNC Machined Billet T6 Aluminum Heatsink Can.
Hight Purity Copper Windings Maximizes Conductivity.
Hight Power Solder Tabs.
Precision Engineered for Maximum Energy Conversion.
Brand: SKYRC
KV: 4370KV
Power supply: 2-3S LiPo battery
Rotor poles: 2
Turns: 9.0R
Resistance: 0.0125 Ohm
Outer diameter: 35mm
Length: 49mm
Rotor: 16mm
Shaft diameter: 3.17mm
Size:49x35x35mm
Weight:164g
Features of ESC:
Less resistance, less heat, more effective.
Safety features: low voltage protection, motor and ESC overheat protection and signal lost protection.
Equipped with 6V/3A BEC, it doesn't need a separate receiver pack
With Program Card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters
Built-in electronic ON/OFF switch
Specifications of ESC:
Power supply: 2-3S LiPo&LiFe battery, 4-8S NiMh battery
BEC output: 5V/2A
Output:Max 360 watte,54A at 25℃,45A at 75℃ ,Peak 240A
Constant current: 60A
Burst current: 90A
Resistance: 0.001 Ohm
Linear BEC:5 Volts,2 Amp
Item size: 48x30x27mm (without cable)
Item weight: 81g (with cable)
Features of Program Card:
LED Program Card for CS60 60A Brushless ESC of Brushless Power System Combo Set.
Simply connect it to the Program Card, you could do ESC programming in a short time and get ready for next run.
Specifications of Program Card:
Cut off voltage: AutoLiPo, None, 5V, 6V, 9V, 12V
Auto-LiPo cut off volts / cell: 3.0V, 3.1V, 3.2V, 3.3V,3.4V,3.5V
Drag brake: 0%, 10%, 20%, 30%,40%,100%
Brakes strength: 0%, 20%, 40%, 60%, 80%, 100%
Punch strength: 0%, 20%, 40%, 60%, 80%, 100%
Reverse type: Proportional Rev.Lock Out, Proportional w/o Reverse, FWD to Brake and Reverse
Motor timing (sensored only): lowest (0°), low (4°), normal (8°),high (16°),highest (30°)
Item size: 80 x 52 x 6mm
Item weight: 20g
Package Information:
Package size: 145x115x48mm
Package weight: 329g
General box package
This 1/10 60A Sensored Combo set is ready to run out of box, coming with 60A ESC,Motor and Program Card.
This combo is perfect for 1/10th scale Car. When you connect the ESC with the program card, you could tune and tweak all your favorite settings such as cut-off voltage, brake andpunch strength, drag brake and other parameters that add up to an incredible RC driving experience.
Hight RPM precision bearings.
High temperature neodymium magnet.
Sensor-based for excellent torque and low-speed drivability.
CNC Machined Billet T6 Aluminum Heatsink Can.
Hight Purity Copper Windings Maximizes Conductivity.
Hight Power Solder Tabs.
Precision Engineered for Maximum Energy Conversion.
Brand: SKYRC
KV: 4370KV
Power supply: 2-3S LiPo battery
Rotor poles: 2
Turns: 9.0R
Resistance: 0.0125 Ohm
Outer diameter: 35mm
Length: 49mm
Rotor: 16mm
Shaft diameter: 3.17mm
Size:49x35x35mm
Weight:164g
Features of ESC:
Less resistance, less heat, more effective.
Safety features: low voltage protection, motor and ESC overheat protection and signal lost protection.
Equipped with 6V/3A BEC, it doesn't need a separate receiver pack
With Program Card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters
Built-in electronic ON/OFF switch
Specifications of ESC:
Power supply: 2-3S LiPo&LiFe battery, 4-8S NiMh battery
BEC output: 5V/2A
Output:Max 360 watte,54A at 25℃,45A at 75℃ ,Peak 240A
Constant current: 60A
Burst current: 90A
Resistance: 0.001 Ohm
Linear BEC:5 Volts,2 Amp
Item size: 48x30x27mm (without cable)
Item weight: 81g (with cable)
Features of Program Card:
LED Program Card for CS60 60A Brushless ESC of Brushless Power System Combo Set.
Simply connect it to the Program Card, you could do ESC programming in a short time and get ready for next run.
Specifications of Program Card:
Cut off voltage: AutoLiPo, None, 5V, 6V, 9V, 12V
Auto-LiPo cut off volts / cell: 3.0V, 3.1V, 3.2V, 3.3V,3.4V,3.5V
Drag brake: 0%, 10%, 20%, 30%,40%,100%
Brakes strength: 0%, 20%, 40%, 60%, 80%, 100%
Punch strength: 0%, 20%, 40%, 60%, 80%, 100%
Reverse type: Proportional Rev.Lock Out, Proportional w/o Reverse, FWD to Brake and Reverse
Motor timing (sensored only): lowest (0°), low (4°), normal (8°),high (16°),highest (30°)
Item size: 80 x 52 x 6mm
Item weight: 20g
Package Information:
Package size: 145x115x48mm
Package weight: 329g
General box package
