Reufrbished WF-7620 Printhead Fit for Epson WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710
Feature:
Excellent performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
This is Aftermarket Replacement Item But Not Genuine.
Size:70x60MM
Description:
Please confirm the fault part of your printer before you decide to replace a print head.
If the print head can't print colors.Please take out the print head from your printer,and use a white tissues to touch the mouth of the print head.
If the color print on the tissues,it means not the fault of print head,and you need to continue to troubleshoot.
The print head is cleaned and tested, and may contain a protective solution and moisture, but does not affect the use .
Compatible Models:
Fit For epson WF7610
Fit For epson WF7620
Fit For epson WF7611
Fit For epson WF7111
Fit For epson WF7621
Fit For epson WF3641
Fit For epson WF7710
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
Feature:
Excellent performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
This is Aftermarket Replacement Item But Not Genuine.
Size:70x60MM
Description:
Please confirm the fault part of your printer before you decide to replace a print head.
If the print head can't print colors.Please take out the print head from your printer,and use a white tissues to touch the mouth of the print head.
If the color print on the tissues,it means not the fault of print head,and you need to continue to troubleshoot.
The print head is cleaned and tested, and may contain a protective solution and moisture, but does not affect the use .
Compatible Models:
Fit For epson WF7610
Fit For epson WF7620
Fit For epson WF7611
Fit For epson WF7111
Fit For epson WF7621
Fit For epson WF3641
Fit For epson WF7710
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
