DIY KIT for IN-14 Arduino Shield Nixie Tubes Clock NCS314 Shield in Acrylic Case with Columns UPS Expedited delivery is highly recommended Economy shipping can be slow and unreliable
Project “Divergence Meter mini” with Acrylic DIY KIT for IN-14 Shield Nixie Tubes Clock Arduino Shield Nixie Tubes Clock with Columns Designed for 6 IN-14 xUSSR Nixie Tubes with Sockets IN-14 Tubes are the most popular mass-produced Nixie Tubes Nixie Clocks are one of the most beautiful and popular Vintage Clocks Clock features Startup Tune, RGB backlight, USB port for updates Shield options include Tubes, Columns, Sockets and Power Supply Accessories include Temp. sensor, GPS Receiver, IR Remote Shield Clock is designed for Arduino UNO and MEGA 2560 Boards It allows you to write your own unique programs for the Arduino platform All the latest Source codes are always available on our GitHub channel PCB, Design, Schematics, Case and Software made by GRA & AFCH
DIY KIT for IN-14 Arduino Shield NCS314-6 Nixie Tubes Clock with Columns and Sockets in Acrylic
This is example of assembled IN-14 Shield Clock in Acrylic Case
Listing contains all parts and components to build IN-14 Arduino Shield Clock in Acrylic
Parts include Tubes, Columns, Acrylic Case and Power Supply
Listing includes:
Tubes Shield NCS314-6 Board Bare PCB
Set of Electronic Parts and Components for Shield NCS314-6 Tubes Board
Set of Hex Spacers and Screws for Shield NCS314-6 and Arduino Boards
Set of Socket Pins for 6 IN-14 Nixie Tubes (included with the Shield Board)
NE2H Neon Bulbs for Dots – 3 pcs (2 Neons for Dots and one spare)
IN-14 Nixie Tubes – 6 pcs Set (included with the KIT)
Columns with Dots – 2 pcs (included with the KIT)
Arduino Control Board – (included, UNO Control Board)
Power Supply (12V, 1A) (US, EU, UK, AU) (included, optional AC plug)
Clear Acrylic Case for IN-14 Shield Nixie Clock (included, disassembled)
Principal Electrical Scheme for Shield NCS314-6 Tubes Board
BOM List for Shield NCS314-6 Tubes Board
User Manual on vintage style paper
This Listing contain all needed parts for Shield Nixie Clock, however you can find optional parts as well by links below:
We are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951
Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626
Power supplies: www.ebay.com/itm/162367596648
Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779
IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139
…And upload software into your Arduino
Link to (software) github.com/afch/NixeTubesShieldNCS314
Link to (video tutorial)
Dear customers! If you have ANY questions, (PLEASE ASK us).
Our Benefits:
Easy to build beautiful clock – we offer case.
Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
Fast uploading via USB.
The latest version of the firmware is always available on GitHub.
No need for additional drivers – we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.
Human friendly menu.
Very high qualty PCB.
Japan alluminium capacitors.
Power-On Self-Test.
Competent Technical support.
Software Features:
Shield support 6 IN-14 Nixie tubes [hh:mm:ss]
Full static display mode
Slot Machine (Ani poisoning)
Temperature display (DS18B20) [Celsius or Fahrenheit]
GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included)
Operation via IR remote control (Remote control Sony RM-X151, not included)
No need refresh or update information on the tubes
The maximum possible brightness of the tubes
12/24 hour format.
Date format: DD:MM:YY
Unique RGB LEDs backlight with 16,7 million colors.
Very easy to switch LEDS off/on.
As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).
Easy updating firmware via USB using Arduino IDE.
Power On Self-Test (POST): LEDs test, tubes test, sound test.
Hardware Features:
Integrated High Voltage Power supply: 150 – 220V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
Test points for testing, adjusting and controlling low and high voltage circuits.
Internal buzzer.
RTC (Real Time Clock) High precision time chip DS3231 with Backup battery
Acquiring time via external GPS module (only with Arduino Mega)
3 buttons on board to control
Potenciometer to adjust High Voltage
IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library)
Acrylic Case for IN-14 Arduino Shield Nixie Clock:
Acrylic Case sent disassembled for safe delivery
Nixie Tubes Clock Shield IN-14 Arduino NCS314 in Acrylic
This is example of assembled IN-14 Arduino Shield NCS314 in Acrylic:
User Manual
Dear customers! If you have ANY questions, PLEASE ASK us
Shipping and Return information
All Items are shipped from Ukraine Via International registered Airmail Shipments are made within 1 business day After the payments are received and verified It takes about 4-7 days via UPS Express delivery It takes about 10-18 days via Standerd shipping It takes about 35-45 days via Economy shipping We combine multiple Items to save on shipping
UPS Express Shipping time (recommended):
Europe:
3-5 days
Germany:
3-5 days
USA, Canada:
4-7 days
Asia, South America:
5-7 days
Australia, New Zeland:
5-7 days
Africa, Central America:
5-7 days
Standard Shipping time:
Europe:
10-12 days
Germany:
10-12 days
USA, Canada:
10-15 days
Asia, South America:
10-18 days
Australia, New Zeland:
12-18 days
Africa, Central America:
12-18 days
Economy Shipping time:
Europe:
25-30 days
Germany:
25-30 days
USA, Canada:
30-35 days
Asia, South America:
35-45 days
Australia, New Zeland:
45-55 days
Africa, Central America:
45-55 days
Return Policy
All Returns are accepted
For Return you should contact Us within 14 Days after receiving the Item
Refunds are made as Money back or Replacements (buyer’s choice)
