Product Dimension:

Feature:

1) According to the original factory specifications.

2) No projection function.

3) The Head-up Display shows the driving speed, driving time and mileage calculation.

4) Use GPS signal guided calculation.

5) No wiring needed to the VSS (vehicle speed signal).

6) Over-speed Alarm setting, Altitude display, Display MPH or KM/h.

7) Auto adjust brightness through sensor for Day & Night driving.

8) Green color display, easy on your eye, total mileage display after car stops.

9) Easy to setup, plug & play. Power through USB cable. No professional installation is required.

Driving Data Record Display:

1) System will start calculating total driving time and mileage when device is powered on.

2) Parking time is not included in the calculations in order to increase the data accuracy.

3) Mileage less than 1KM will be considered as invalid data.

4) Once the vehicle stops for a few seconds, you will see data displayed on the screen in order as total mileage, and then the total driving time in minutes.

5) All driving data will be cleared once the vehicle is engine off, and system will start the calculation again when the car power resumed.

Fatigue Driving Alarm:

1) In every hour, system will trigger a fatigue driving alarm with continuous driving time displayed, in order to remind driver to avoid drowsy-driving.

2) Example: 001 means one-hour continuous driving, 002 means two-hour continuous driving and so on.

Over Speed Alarm:

1) Set the over speed alarm rate (As described in the IV Operation Guide).

2) A three times Beep sound alarm will be triggered when over speed occurs.

3) No more alarm will be triggered when over-speed is detected continuously.