RED VRX SPORTS
………..
UNIVERSAL CAR
SEAT COVERS
Fully air bag
compatible
*
our newest sport
selection of universal design car seat covers which will stretch to
fit.
Colour: RED
/ BLACK
"This seat cover
has a very smart look and once fitted they will change the feel and appearance
of the entire vehicle. The picture is from a car which was used by a builder
and the original seats were in bad condition due to wear and
tear. With high grade specifications our car seat covers will
enhance the looks, increase the lifespan of the original seats, remarkably
improve the resale value of your car and enrich the comfort factor and thereby
add to your driving experience. Once fitted, you will have the peace of mind
that your seats will remain in a pristine condition.
*
Designed and
Developed by the team of SB Seat Covers Ltd this item is -
"
Designed for comfort and engineered to last"-
*
Description of
product:
Universal Size Semi
fit (will stretch to fit)
COMPLETE FULL SET:
* 2 Front Seat Covers,
* Full Complete Rear
Seat - (This is made as a two-piece standard rear i.e. one
for the complete base and one for the complete top section)
* 5 Matching Headrest
Covers
THIS IS A FULL
COMPLETE SET
*
Please
refer to the last picture, we can also offer a combination of the matching
floor mats and steering wheel covers (steering wheel cover and floor mats
are not part of this listing).
*
Please note the rear
seat cover is in 2 sections - 1 BASE / 1 TOP, to achieve a tight fit it is best
to spend time, maybe remove the rear seats and attach all the ties/fixings as
required. You may need to pop holes into the seat cover for the seat belt
slots.
YES A LITTLE BIT OF
DIY IS REQUIRED, BUT THIS WILL GIVE A SUPER FINISH.
*
Safety Features:
Our seat covers
are compatible with seats which have airbags and the system that we
have used is weakened stitch technology.
Each seat cover has a
special manufacturer air bag label.
The strength / length
/ distance of each stitch thread is calibrated so that the side of the seat
cover will tear in the event of the air bag exploding.
*
FITTING
INSTRUCTIONS
STEP
1. PULL THE SEAT COVER OVER THE HEAD REST AND THE SHOULDER.MAKE SURE
THE SEAT COVER IS IN LINE AS YOU PULL DOWN.
STEP
2. BRING THE SEAT COVER TO THE CENTER OF THE SEAT AND FEED THE
ELASTIC TIES THAT ARE SEWN INTO THE BASE OF THE SEAT COVER AND FEED THEM RIGHT
THROUGH. DO NOT BE AFRAID OF TUCKING THE FABRIC RIGHT INTO THE SEAT FOR SMART
LOOKING FIT.
STEP
3. PULL THE ELASTIC TIES THAT YOU HAVE FED THROUGH AND PULL THEM
THROUGH TO THE BACK.
STEP4. PULL
THE BACK OF THE SEAT COVER DOWN THE BACK AND TIE THE ELASTIC TIES THAT ARE ON
THE BACK OF THE SEAT COVER TO THE ONES THAT YOU HAVE FED THROUGH.
STEP
5. LINE THE BASE OF THE SEAT COVER AND FEED THE ELASTICS ON THE SIDES AND
THE FRONT, MARRY AND TIE THEM TOGETHER WITH THE ONES ON THE BACK OR USE THE
METAL HOOKS TO GIVE A FIRM FIT.
*
PLEASE
STATE IF YOU HAVE FRONT SEAT AIRBAGS, AS THESE SEAT COVERS CAN BE ADAPTED TO
SUIT AT NO EXTRA CHARGE OTHERWISE WE WILL JUST SEND YOU STANDARD
FRONT SEAT COVERS
IF
YOU ARE UNSURE PLEASE ASK, WE ARE HERE TO HELP!!
*
Guarantee and refund
policy
In case of a damaged/ faulty item
(because mistakes do happen or occur) and the fault lies with us, we will
certainly refund or offer you an exchange for the product.
RETURN THE ITEM WITHIN 14 DAYS
Item must be returned in the original
packaging, must not be full of creases and returned to us in the same condition
as we sent to you, as we may wish to resell the item.
Colour Disclaimer: Please
note that we have tried to use the accurate pictures with regards to the
colour but there may be minor differences due to photographic limitations.
*
Our products are supplied to main dealerships… . We are now
offering this product directly to the public.
*
Fitting
Instructions:
We
use elastic ties to secure the covers in place. The fitting time required
is approx. 45 mins. to install these seat covers correctly.
*
AN
EXCLUSIVE VEHICLE PRODUCT BY SB CAR SEAT COVERS
LIMITED - 'DESIGNED FOR COMFORT AND ENGINEERED TO LAST'
*
If
you are fed up of wishy-washy seat covers that are made in the back streets of
Bombay which slide all over the place and, the worst thing of course, they
sweat you to death, feel free to try our UK made product. This is an English
product which is manufactured to very high standards.
Why
buy from us?
- UK manufactured product
- UK made fabric
- UK designed item
- More than 34 years of Automotive Experience- Est
1983.
- Exceeding customer expectations and continual
improvement are the company's core values.
- Close supervision over the entire production
cycle ( i.e. strict quality control), this ensures that you get a flawless
item.
- Friendly and experienced sales staff. We are
always eager to help our customer.
*
Why
should you have confidence in us?
All
of our seat covers are made and delivered directly from our factory in
Stockport.
POSTAGE & PACKAGING COST OUT SIDE UK-
FRANCE GERMANY
BELGIUM LUXEMBOURG NETHERLANDS
: £14
AUSTRIA DENMARK SWITZERLAND :
£16
FINLAND ESTONIA HUNGRY
POLAND PORTUGAL SWEDEN: £27
CZECH REPUBLIC SLOVAKIA
ITALY SPAIN : £18
BOSNIA BULGARIA CROATIA
GREECE ICELAND LATVIA: £37
NORWAY: £62
MALTA - BETWEEN:
£82- £97
AUSTRALIA - BETWEEN: £102
-£120
ISRAEL: £102
*
THIS
PRODUCT WILL BE SENT VIA UK MAIL OR PARCEL FORCE. IT WILL HAVE TO BE
SIGNED FOR
DISPATCH
TIME - A FEW WORKING DAYS AFTER PAYMENT.
RETURNS
- WE WILL ONLY ACCEPT RETURNS IN OUR ORIGINAL PACKING BAG.
WE
WILL NOT PAY FOR THE RETURN PP COSTS . . .. UNLESS IT IS OUR FAULT E.G. ITEM IS
DAMAGED
*
Payment
method:
PayPal,
debit card, credit card.