Product Description
Product Information
Item Name:
NX3 3D Flight Controller Gyroscope Balance For RC Plane Fixed-wing Aircraft
Description:
Voltage Range: 5-6V DC.
Dimensions:
Weight: 6.5g.
Feature:
1.Four Model Types supported: single aileron, dual ailerons , flapperons, delta and vtail.
2.Three Flight Modes supported:
a. Rate Mode ,Rate Mode for offset correction.
b. Hold Mode ,HOLD mode for attitude hold
c. Gyro Off Mode,transsmiter control the plane directly.
3.Two kinds of Gain Control Method supported:Master Gain from the radio, Independent Axis Gain from the Variable resistor on the Controller board.
4.Using superior algorithm, Bring a more comfortable and more sensitive sense of control .
VERY IMPORTANT :
The Controller has to re-learn center position after installation,or replacing a new radio system, or making a trimming(or Sub-Trim)change within the transmitter, otherwise the servos may move to one side automatically when switching to hold mode.To do this,just quickly flip the flight mode switch twice between rate mode and hold mode within 1 second!
Status LED Description:
LED OFF: NX3 in Gyro Off Mode.
LED ON:
LED flash: NX3 in Hold Mode.
WARNING :
PLEASE READ THE FOLLOWING STEPS VERY CAREFULLY BEFORE YOU START TO INSTALL A NEW PLANE!
Step 1:Mounting
The board need to be firmly mounted near the center of the gravity of the plane by using the double-tape provide.Please make sure the longer side of the board is along with the heading direction.After mounting ,please check again if the board is attached firmly in the plane.
Voltage Range: 5-6V DC.
Dimensions:
Weight: 6.5g.
Feature:
1.Four Model Types supported: single aileron, dual ailerons , flapperons, delta and vtail.
2.Three Flight Modes supported:
a. Rate Mode ,Rate Mode for offset correction.
b. Hold Mode ,HOLD mode for attitude hold
c. Gyro Off Mode,transsmiter control the plane directly.
3.Two kinds of Gain Control Method supported:Master Gain from the radio, Independent Axis Gain from the Variable resistor on the Controller board.
4.Using superior algorithm, Bring a more comfortable and more sensitive sense of control .
VERY IMPORTANT :
The Controller has to re-learn center position after installation,or replacing a new radio system, or making a trimming(or Sub-Trim)change within the transmitter, otherwise the servos may move to one side automatically when switching to hold mode.To do this,just quickly flip the flight mode switch twice between rate mode and hold mode within 1 second!
Status LED Description:
LED OFF: NX3 in Gyro Off Mode.
LED ON:
LED flash: NX3 in Hold Mode.
WARNING :
PLEASE READ THE FOLLOWING STEPS VERY CAREFULLY BEFORE YOU START TO INSTALL A NEW PLANE!
Step 1:Mounting
The board need to be firmly mounted near the center of the gravity of the plane by using the double-tape provide.Please make sure the longer side of the board is along with the heading direction.After mounting ,please check again if the board is attached firmly in the plane.
Step 2:Model Type Selection
The DIP switches set the WING mode,Please match the type of your aircraft with Normal Airplane(single aileorn),Normal Airplane(dual aileron for flapperon), Delta-wing (Flywing-wing)and V-tail according the pictures 1 to 4. if you change any DIP switch settings, power cycle the device to enable the new setting to take effect.
The DIP switches set the WING mode,Please match the type of your aircraft with Normal Airplane(single aileorn),Normal Airplane(dual aileron for flapperon), Delta-wing (Flywing-wing)and V-tail according the pictures 1 to 4. if you change any DIP switch settings, power cycle the device to enable the new setting to take effect.
Step 3:Wiring
Please connect the control board and the radio receiver using wires provide according the pictures 1 to 4.Pay attention to the color of wires to avoid anti-plug.
Includes:
1 Set NX3 Flight Control Board
Terms and Condition
Payment
- We only accept payments via PayPal.
- Payment must be received within 7 days after the end of the action
Shipping
- Shipping Location: We ship to Worldwide. Item will be shipped to the PayPal shipping address if no special notes from buyer.
- Shipping Method: Items will be shipped out within 1-2 business days** by Standard Air-Mail after receiving full Payment.
- Registered Mail Service: We also offer REGISTERED MAIL service for buyer, the additional cost per package is US$2. Tracking number will be provided for registered mail only. For the order amount is over US$20, the registered mail fee could be waived.
- To Ship to United States, all shipping fee is included the registered airmail service.
Estimated Shipping Time
For USA/ Canada / United Kingdom / Australia / Germany: 8 -15 business days**
For Spain / France / Netherlands / Belgium / Austria: 15 - 25 business days**
For Italy / Brazil/ Other Countries: 20 - 40 business days** If you can't offer this patience, please Do Not Buy! Or please choose Express delivery at higher postage fee!
- Please email us for cost details when you would like express service for faster delivery.
**The business day is not included weekends and public holidays.
Shipping Discount on multiple purchased
- We always combine Postage and provide 10% discount for the shipping fee of items or above. After you buy 2 items or above, please inform us your ebay account name and we will send an invoice with shipping discount to you ASAP, then you could pay easily and exactly.
Return Policy
- All products have been checked and packaged in good condition before dispatch.
- We provide 30 days return policy, calculated from the date we shipped the item to you. For any reasons you are not satisfied, please return the item to us in its original condition for a refund or an exchange. Buyers have to pay for the return cost and we will pay the cost for resend.
- Before mailing us back the item, please contact us via email or eBay system so that we could provide you the detailed return and exchange instruction.
Contact Us
- If you have any questions, it is welcomed to contact us via eBay system. We always reply you within 48-hour.
- We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback.
