Buying a LED sign means choosing an advertising method with a high visual impact, which will allow you to attract many customers to your business or to your products.

It is a modern way to make yourself known to the public, moreover thanks to the innovative LEDs, you will have very low consumption, an average life of the article of 15-20 years and the clear and immediate visibility of the messages.

Practicality and ease of use make this panel the ideal tool for your advertising

Great brightness, perfectly legible writings day and night

Made with 128 * 16led matrix, which is a total of 2048led RGB TRIPLOCHIP

IN FACT BY INSERTING A STANDARD FORMAT SIM, THE SIGN CAN BE PROGRAMMED BY SIMPLE SENDING AN SMS TO THE NUMBER OF SUCH SIM

Technical data:

- Scrolling text from left to right, right to left, top to bottom, bottom to bottom, and Flash

- Text visible at 160 degrees of angle and 70 meters away

- Perfect visibility even during the day

- 6 scrolling speeds

- Ability to save 99 messages, each with 200 characters

- Operating temperature: -5 ° C to +50 ° C

- Optimal humidity range: 20% to 90%

- Power supply: 100 ~ 240 Vac / 3 A - 5vdc 4Amp (power supply included

- Consumption: 20 W max

- Structure in elegant and solid aluminum

- Also suitable for outdoor use if adequately protected from rain / excessive humidity

- Size: 80 * 12cm, Weight 2kg

- Can be fixed to the wall or ceiling, Fixing hooks included

Supplied:

- Led panel

- Power supply

THE INSTRUCTIONS ARE NOT IN THE PACKAGE, WE SHOW HERE:

INSTRUCTION MANUAL PANEL 16X128 RGB SMS

On the right side you will find a small yellow button, press it with a toothpick or something pointed to bring out the sim slot

Make sure that the sim does not have the initial pin, otherwise the panel will not be able to receive any text

Once the sim is inserted you can connect the power supply to the socket, if the sim works correctly the message "SIM CARD OK" will be displayed, now you can start programming.

EXAMPLE OF THE PROGRAMMING FORMULA (to be sent via sms to the panel sim number):

* <CR> <F1> YOUR TEXT # 01

1-The asterisk is required at the beginning of each text message
2- <CR> is the color setting, in the above example CR stands for red color, other colors are CY yellow, CG green, CC blue, CB blue, CP purple, CW white
3- <F1> is the scrolling type setting, in the example F1 stands for static text, other effects are F2 scrolling text from the top, F3 scrolling text from left, F4 scrolling text from below, F5 text Flashing
4-If you do not give the commands for the color and type of scrolling (for example * YOUR TEXT # 01) the color and scrolling will be random, or you can also program only color (* <CR> YOUR TEXT # 01) and in such case the scrolling will be random, or even programmed scrolling and random color (* <F4> YOUR TEXT # 01)
5-Only your text can be written in uppercase or uppercase, all other functions always in uppercase
6-the final part of formula # 01 indicates the assignment of your text to program number 1, if you want to insert messages over 200 characters it is better to create more than one program, in which case you will have to send the first formula with the final # 01 and the second formula with ending # 02
7-Attention, the RUN LIST, that is to say the sequence to be scrolled, is only on program 1, so if you send more than one formula you will also have to tell the panel to scroll program 02, with the following sending: * RL # 01 # 02 * in this way the panel will know that it will have to run program 1 first and then program 2   

OTHER FUNCTIONS:

Once the programs have been entered, you can set the operating speed with * S1 * (where 1 stands for maximum speed and 6 for minimum) and the brightness with * B1 * (where 1 is not very bright and 6 is maximum brightness)

TO DELETE EVERYTHING:
* DEL * command wait 30 seconds and unplug the power cord

Once programmed, the panel keeps the memory even if the power supply is cut off.
You can also send messages without these being programmed, by sending a formula to a number not present in the run list, for example * TEMPORARY TEXT # 09

If by mistake you send a command that the panel does not recognize, random characters will be shown and it will be necessary to remove the power supply to perform a reset.