Red Grid Inkjet Heat Transfer Paper for Light Garments Letter Size 8.5"x11"
For use with Inkjet Printers & Light Colored Fabrics
Commercial Quality
Made in USA.
ITEM
DESCRIPTION RED GRID TRANSFER PAPER.
Red Grid is one of our most popular papers due to the incredible
vibrancy and color retention. With an easy peel and soft hand, Red Grid is the
best paper for photographs and bright artwork. Red Grid is also compatible with
most cutters, including Roland GX-24. Red Grid makes professional print-and-cut
applications and can be applied by hand iron or heat press.
INSTRUCTIONS:
PRINTING: RED GRID TRANSFER PAPER.
1) Print on the white side of the paper.
2) Mirror/flip your before you print.
3) Check printer settings and set to single sheet feeding.
4) We recommend using the bypass tray for single-sheet
feeding.
For best results, trim away unprinted areas of the transfer as
close to image as possible. We recommend using an image with rounded
corners to avoid corner lift-off after washing.
TRANSFERRING- HEAT PRESS APPLICATION (Recommended) RED GRID
TRANSFER PAPER
1) Preheat the garment for a few seconds to remove wrinkles and
moisture. Let cool.
2) Place the transfer on top of the garment with the printed side
down, red grid facing up.
3) Press on a commercial heat press machine for 20 seconds at
345-355°F
(173-180°C) using heavy pressure.
4) HOT peel. Peel the transfer immediately after pressing (Caution
transfer will be hot)
TRANSFERRING- HOUSE-HOLD IRON ON APPLICATION
1) Choose a smooth, hard surface at waist level or below. You
must put all of your weight into the ironing, push down as hard as you can.
That is why you do not use an ironing board
2) Preheat the iron to the highest cotton setting for 3 minutes -
do not use warm. Do not use steam (empty all the Water).
3) Place a pillowcase on the hard surface and iron to remove any
wrinkles.
4) Place the garment on the center of the pillowcase and iron to
ensure flatness.
5) Place the transfer printed side facing down in the desired
position on the garment
6) Step press with firm pressure, slowly along each side of
the image. Place the iron in one spot and press that spot. Then
more the iron to the next spot.
7) Hold each press for 45 seconds
8) Continue to step press over the entire image. Ensure
all edges and corners are firmly pressed. Total
ironing time should be 5 to 6 minutes for 8.5 x 11 size image.
9) When all areas are adhered do a quick pass with the iron to
heat up the whole transfer. Peel the transfer
immediately while it is still hot.
TEST APPLICATION RED GRID TRANSFER PAPER
We test each of our products thoroughly on various substrates
using different transfer equipment. However, it is impossible for us to
duplicate all variables using all substrates and transfer equipment. Therefore,
it is essential that you test the paper prior to production using your
equipment, methods, and substrate material. Heat presses very in accuracy.
Conduct tests to determine the best time and temperature to use with your
equipment. Please keep in mind the the seller's and manufacturer's maximum obligation
shall be to replace any paper that has proven to be defective. Neither the
seller nor the manufacturer shall be liable for any injury, direct or
consequential, arising out of the use of, or inability to use this paper.