This lamp prototypes were ordered during pandemics to clean rooms from virus, but they also work against fungi, bacteria, allergens, destroying small organic particles. They generate 2 UV bands, the one 254 nM that goes through an air disinfecting directly, and another 185 nM that ionizes an oxygen, so it acts as a bleach entering hard to clean places. It has initial delay, and 3 modes, for 15, 30, 60 minutes. Their useful distinct feature is, a proximity sensor. As you know, UV-C exposure can be harmful for skin, eyes. So, as soon as the lamp senses somebody or something approaching at 25 feet distance, it pauses and issues beeping warnings.

SPECIFICATIONS
Voltage: 120V
Power: 38W
Output Power: 100μW/cm2W/cm2
Size: 7 1/3 inches diameter x 16 1⁄2 inches high
Range: up to 645 ft2 (60m2)

Wavelength: 185 nm and 254nm
The bulb is rated for 5,000 hours

Ozon Generating Lamp with Motion Sensor Protection:

1.Plug in the power, the light in the switch button will flash on, indicating the device
is in standby mode.
2. To sanitize Room 108ft2 (10m2) to 216ft2 (20m2) required about 15 minutes.

Press the switch button one time.
The indicating light in the button will turn red.
Leave the room.
Appliance will scan the room for 36 second, if there is no any object moving around
the lamp within 8 meters, the device will beep from slow to fast then the ultraviolet
lamp switches on.
(The motion sensor is not affected by obstacles.)
If people or pets present the device will be switched off. The device will restart
automatically when people or animal leaving.
After totally sterilizing 15 minutes the device will switch off.
3. To sanitize Room 226ft2 (21m2) to 430ft2 (40m2) required about 30 minutes.

Press the switch button twice.
The indicating light in the button will turn on green, automatic processing starts as
described above.
Leave the room.
After totally sterilizing 30 minutes the device will switch off.
4. To sanitize Room 441ft2 (41m2) to 645ft2 (60m2) required about 60 minutes time.

Press the switch button three times.
The indicating light in the button will turn on white, automatic processing starts as
described above.
Leave the room.
After totally sterilizing 60 minutes the device will switch off.

The main feature of this particular lamp is a movement proximity sensor that protects people from unexpected exposition to powerful UV rays.
If somebody approaches closer than approximately 25 feet to the lamp, it pauses and beeps until the obstacle gone.

Make your offer!
Shipment from Austin, Texas by UPS, since all such lamps have quartz mercury tubes that can not be shipped by air.

Ultraviolet irradiation is known for it’s efficiency for sterilization and disinfection for more than 100 years. It is used in a variety of applications, such as food, air,
and water purification.

This device produces an UV-C light and Ozone – unstable molecule of an oxygen with a formula O3 Ozone disinfects spaces not reachable by direct UV light.
Please use precaution. Do not switch the UV light in presence of people and animals.

Long term direct exposure of humans and pets to UV Light can cause skin and eye burns.
Ozone can damage mucous and respiratory tissues in animals. It takes more than 60 minutes to complete ozone decomposition.

The motion sensor is not affected by obstacles.

If people or pets present the device will be switched off. The device will restart automatically when people or animal leaving.
After totally sterilizing 15 minutes the device will switch off.

Information on safe disposal of broken UV lamps: https://wabibaby.zendesk.com/hc/ en-us/articles/360019255751-California-Proposition-65-Warning-on-UV-lamp- mercury-