- Craft / Ferrite -make your own
- Flexible - strip, paper, signs
- Whiteboard / Fridge Magnets
- Magnet Testing Equipment
- Neodymium Blocks
- Neodymium Disks / Rods
- Neodymium Cubes
- Neodymium Rings
- Neodymium Spheres
- Neodymium - Self Adhesive
- Neodymium N52 - High Grade
- Neodymium High Operating Temp
- AlNiCo (Alcomax)
- Samarium Cobalt
- Limescale Magnets
- Magnetic Toys
- Pot / Anchoring Magnets
- Special Offers
- Made In UK
- Non-Magnetic Items
- Other
Neodymium disc magnets. Small & Tiny 2mm 3mm 4mm 5mm 6mm N35 N52 N55 rare earth
- From £1.450
- RRP £1.460
- |
- You Save £0.010
Technical Specifications
- N35 is the industry standard grade. N52 is the highest grade widely and reliably available and in a size for size comparison, N52 will have about 25-35% more pull than the same size N35 grade magnet. N55 is the highest grade currently available and in a size for size comparison has about 5% more pull than the same size N52 grade magnet.
- Manufacturing Tolerances: +/-0.1mm on any dimension
- Coating: Ni-Cu-Ni (Nickel-Copper-Nickel)
- Maximum Temp: 80°C / 176°F
- WARNINGS:
- All neodymium magnets are unsuitable for children
- Neodymium magnets are not toys
- DO NOT INGEST. If ingestion occurs seek immediate medical attention.
- All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.
- Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
Theoretical Maximum Pull:
- 2x0.5mm: 0.2lb / 2oz / 69g
- 2x1mm: 0.25lb / 4oz / 114g
- 2x2mm: 0.67lb / 11oz / 304g
- 2x4mm: 1lb / 15oz / 437g
- 3x0.5mm: 0.2lb / 3oz / 82g
- 3x1mm: 0.4lb / 6oz / 164g
- 3x1.5mm: 0.6lb / 9.6oz / 272g
- 3x2mm N35: 0.7lb / 12oz / 328g
- 3x2mm N52: 0.9lb / 15oz / 413g
- 3x3mm: 1.51lb / 24oz / 684g
- 3x4mm: 1.8lb / 29oz / 826g
- 4x0.5mm: 0.3lb / 6oz / 138g
- 4x1mm: 0.5lb / 8oz / 215g
- 4x1.5mm N35: 0.7lb / 12oz / 328g
- 4x1.5mm N52: 0.99lb / 16oz / 450g
- 4x2mm N35: 1lb / 15oz / 437g
- 4x2mm N52: 1.32lb / 21oz / 599g
- 4x3mm: 1.8lb / 29oz / 826g
- 4x4mm: 1.9lb / 31oz / 875g
- 5x0.5mm N35: 0.29lb / 4.7oz / 132g
- 5x0.5mm N52: 0.42lb / 7oz / 190g
- 5x1mm N35: 0.6lb / 10oz / 274g
- 5x1mm N55: 0.8lb / 12oz / 361g
- 5x2mm: 1.5lb / 24oz / 688g
- 5x2.5mm: 2.09lb / 33oz / 950g
- 5x3mm: 1.8lb / 29oz / 820g
- 6x0.5mm: 0.4lb / 6oz / 183g
- 6x1mm N35: 0.7lb / 12oz / 328g
- 6x1mm N52: 0.99lb / 16oz / 450g
- 6x2mm N35: 2.05lb / 32.8oz / 930g
- 6x2mm N52: 3.04lb / 48.6oz / 1380g
- 6x3mm: 1.8lb / 29oz / 826g
- 6x6mm: 6lb / 96oz / 2735g
These are ideal for a large range of hobby crafting including magnetising miniature war-game figures, card crafting and scrapbooking. They are also good for DIY and MRO uses. If you need to use an adhesive, we recommend using something that will bind to metal and whatever surface you want to glue the magnet to.
The pull is calculated using a mathematical formula and is, therefore, the theoretical maximum hold between one magnet and a mild steel plate. It does not take account of manufacturing tolerances, plating, plating thickness or variances in a mild steel plate. The vertical hold is based upon the calculated pull and is, therefore, only for guidance. Factors such as paint thickness, plasticised surfaces, movement and vibration are not taken into account.